$20.15 |
20% OFF Phone Price : $25.15
CONFIRM THE PART FITS
Part Information
This burner (part number P02008029A) is for gas grills.
Burner P02008029A distributes gas to create an even flame across the cooking area.
Wait until the surface is cool to the touch before installing this part.
Frequently Used Together
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #14116673 Kenmore Elite gas grill | 14116673 | Gas grill |
| Model #14116233 Kenmore gas grill | 14116233 | Gas grill |
| Model #14116235 Kenmore gas grill | 14116235 | Gas grill |
| Model #640-117694-117 Kenmore gas grill | 640-117694-117 | Gas grill |
Reviews
Installation can be a challenge.
It is an easy process if you can get the screws out at the end of the burner. I had to grind two of them out. They were all but welded in. Other then that....a piece of cake
MackUSMC, North Carolina
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Rusted out Burnets droscrews and brackets probable
Burners likely cannot be attached to support bracket. Screws rusted in place and support bracket too fragile to drill out screws. Is you are a perfectionist plan on replacement no the back wall of your grill or welding a new support bracket.
GGB i M, Metmaora MI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install.
Easy to install after I had to drill out the other screws. Been a great and heavily used grill since I bought it in August....2008
BJ21, Eau Claire Wi
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
gas grill burner
easy to install these burners once the rusted screws had been removed.
davec999, des moines, ia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install with one exception.
Easy to install once the old burner tubes were removed which was not an easy task. The screws holding the flat end of the tubes all broke off upon trying to remove them even after applying Liquid Wrench, waiting the prescribed time for it to work and then trying to remove them with a screw driver. Since the tubes are stainless steel there was no way to drill them to install new screws. Fortunately I had some small clips that attached the flat end to the metal ledger they sit on.
DSAL13, WALL,NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour