CONFIRM THE PART FITS
Part Information
This drive pulley assembly (part number 004-9866) is for exercise cycles.
Drive pulley assembly 004-9866 spins the drive belt when the crank arm is turned. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #AD6 Schwinn exercise cycle | AD6 | Bicycle |
Model #100250 Schwinn exercise cycle | 100250 | Bicycle |
Reviews
Easy to install
Installing the drive pully assembly was pretty quick. Maybe 30 minutes. Key is to have the screw that pulls the assembly down in place on both sides to be fully open to start so that the pulley assembly can be pulled into place. Then to tighten those evenly. The hard part is putting that cover back in place - screws are very hard to align.
Jaxson, Fremont, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Fast service perfect fit
The instructions stated total labor time would be 1.5 hours only took me 30 mins simple easy repair
Fonzo, Louisiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes