How do I access the control boards in an Electrolux freestanding electric range?
Unplug the range to disconnect electrical power.
To access the control panel boards, start by taking out the 8 screws securing the upper rear access panel to the range.
Remove the upper rear access panel.
This gives you access to the surface element relay board, the two power supply boards, the convection fan variable speed board, the power UIB (User Interface Board) board and the electronic controller (also called the EOC—electronic oven control board).
To access a majority of the other components, start by taking out the 8 screws securing the lower rear access panel to the range.
Remove the lower rear access panel.
This gives access to the last board—the oven control relay board.
How do I remove the convection fan and element in an Electrolux electric stove?
Unplug the range to disconnect electrical power.
To remove the convection fan motor and element, start by taking out the 4 screws securing the fan cover in place, inside the oven.
Remove the fan cover.
To remove the convection element, start by taking out the 2 front mounting screws. Then, behind the stove, disconnect the wiring to remove the convection element.
To remove the convection fan motor, start by removing the fan blade. Use an open-ended wrench to remove the fan blade mounting nut—turning it in a counter-clockwise motion.
Remove the 2 screws found underneath the fan blade. Next, take out these 3 screws from the back of the unit. Disconnect the wiring, and you can then remove the convection fan motor.
How do I remove the hidden bake element in my Electrolux range?
Unplug the range then follow these steps to remove the hidden bake element in an Electrolux range:
Take out the 2 screws securing the oven bottom panel in place.
Remove the oven bottom panel.
Take out the 4 bake element mounting screws.
From behind the range, disconnect the wiring from the bake element.
Remove the bake element.
Install the new bake element and reassemble the range in reverse order.
How do I remove the broil element in my Electrolux range?
Unplug the range to disconnect electrical power.
To remove the broil element, take out the 6 mounting screws. From behind the range, disconnect the wiring from the broil element. Remove the broil element.
Install the new broil element and reassemble the range in reverse order.
You can order replacement parts for your range from our Sears PartsDirect website. Key the model number of your range into the search bar at the top of the webpage and select the parts you need from our convenient parts diagrams for your stove.
Always remember to unplug the range before accessing and replacing parts.
