RCA Dryer Parts — Browse All Models

Troubleshooting RCA dryer issues

RCA dryers are valued for their durability and simplicity. But even dependable machines can wear down over time. If your dryer won’t start, heat, or finish cycles properly, start with these tips.

Dryer won't heat in a gas model

If your gas dryer is tumbling but not producing heat, the issue might be with the burner assembly. One common culprit is a failed solenoid coil. If the igniter glows and then shuts off without a flame igniting, it’s likely time to replace the gas valve coil kit.

Dryer won’t start at all

Start by checking the door switch. If the switch doesn’t detect when the door is closed, the dryer won’t start. You can replace the door switch if it's faulty.

Drum isn’t turning

If the motor is running but the drum isn’t spinning, the drive belt could be broken. To get things turning again, replace the dryer drive belt.

Cycles aren’t advancing

If your RCA dryer turns on but won’t move through the timed or automatic cycles, the timer might be at fault. You can replace the dryer timer to restore cycle control.

Commonly replaced RCA dryer parts

• Thermal fuse – Cuts power to protect the dryer when temperatures get too high. If it blows, your dryer may not run or heat.
• Lint screen – A clogged or damaged lint filter can block airflow and slow down drying performance.
• Blower wheel – Pushes heated air through the drum and out the vent. A cracked blower wheel can rattle or reduce airflow.
• High-limit thermostat – Shuts off the heat if the dryer gets too hot. A faulty thermostat can cause inconsistent temperatures.

Why use OEM RCA dryer parts from Sears PartsDirect?

Only OEM parts are designed and tested to work specifically with your RCA model. Sears PartsDirect offers original RCA dryer components backed by diagrams, repair guides, and fast shipping, so you can repair your dryer with confidence.

RCA dryer FAQs

Where can I find the model number on my RCA dryer?

Look for a label inside the dryer door frame or on the back panel. Enter that number in our search bar to view parts and diagrams for your exact model.

What causes my RCA dryer to run but not dry?

The most common reasons are restricted airflow from lint buildup, a failed heating element or coil, or thermostat issues. Cleaning the vent system and checking key components is a good first step.

Why won’t my RCA dryer start after I press the button?

If you hear a click but nothing happens, check the thermal fuse and door switch. If the dryer is completely silent, the start switch, timer, or power supply may be the issue.

How long does an RCA dryer last?

With proper maintenance, an RCA dryer can typically last 10 to 13 years. Regularly cleaning the lint trap and vent system helps extend its lifespan.