$60.66 |Â
21% OFFÂ MSRP : $77.00
CONFIRM THE PART FITS
Dishwasher Circulation Pump W11113839
Part #W11113839
Replaced by #W10894668
?
Manufacturer substitution
This part replaces W11113839. Substitute parts can look different from the original.
Online Price
$130.66 |Â
41% OFFÂ MSRP : $220.00
In Stock
For ZIP codes near Edit
This part fits
Part Information
This pump motor (part number W10894668) is for dishwashers.
Pump motor W10894668 delivers water to the spray arms to clean the dishes during the wash cycle.
Disconnect electrical power to the dishwasher before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $22.42 |Â30% OFFÂ MSRP : $32.00
- $59.85 |Â34% OFFÂ MSRP : $91.00
- $8.02 |Â60% OFFÂ MSRP : $20.00
- $86.41 |Â34% OFFÂ MSRP : $130.00
- $133.86 |Â11% OFFÂ MSRP : $150.00
- $62.62 |Â43% OFFÂ MSRP : $110.00
- $56.31 |Â22% OFFÂ MSRP : $72.00
- $21.89 |Â22% OFFÂ MSRP : $28.00
- $200.85 |Â16% OFFÂ MSRP : $240.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #66514799N513 Kenmore dishwasher | 66514799N513 | Pump, washarm and motor parts |
| Model #66514793N513 Kenmore dishwasher | 66514793N513 | Pump, washarm and motor parts |
| Model #66514792N513 Kenmore dishwasher | 66514792N513 | Pump, washarm and motor parts |
| Model #66512769K313 Kenmore Elite dishwasher | 66512769K313 | Pump & motor |
| Model #KUDE20IXSSA KitchenAid dishwasher | KUDE20IXSSA | Pump, washarm and motor parts |
| Model #66514759N512 Kenmore Elite dishwasher | 66514759N512 | Pump, washarm and motor parts |
| Model #IUD8500BX1 Ikea dishwasher | IUD8500BX1 | Pump, washarm and motor parts |
| Model #KDFE304DWH1 KitchenAid dishwasher | KDFE304DWH1 | Pump, washarm and motor parts |
| Model #66512776K314 Kenmore Elite dishwasher | 66512776K314 | Pump, washarm and motor parts |
| Model #KUDE70FXPA5 KitchenAid dishwasher | KUDE70FXPA5 | Pump, washarm and motor parts |
Reviews
Good fit, works
The circulation and drain pumps fit as expected and work well at this point (only one partial cycle for testing so far). I was pleased to find that the circulation pump came with a new hose and the appropriate clamp for installation. The dishwasher needs to be removed and turned on its side for installation, and that is the biggest part of the job. The drain pump unlocks by twisting it, and there is a locking tab which must be released to do that - look on YouTube for a video if you can't find it. To properly crimp the clamp for the circulation pump you will need a crimping tool for that style of clamp, which is commonly used for underground sprinkler systems.
Goober75, Idaho
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Installation a breeze
Installation very intuitive and easy. Two torx screws and 3 wiring harnesses. The only part of the install that required a bit of work was the hose clamp. Ended up using a end cutter to cinch it down. I'm sure there's a specific tool for the job. End cutter worked fine though
DrDon, San Diego CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Fixed the dish washer
The pump and motor assembly fixed our dishwasher, and doing it myself saved potentially hundreds on a technician's service call. The replacement item number was not the same as the factory number, but the part looked and functions identically. Be sure to have a crimping pliers for the hose clamps they send - it's not a screw type. I picked up an appropriate pliers at the hardware store. The videos on the site were invaluable in showing a general attack strategy. Review them before attempting the repair if you are not familiar with dish machine repairs.
Robear-San, Champlin, MN
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours