Pro Source Water pump Parts — Browse All Models

Common Pro Source water pump parts

• Pump check valve. The water pump check valve prevents water backflow into the pump.
• Diffuser. The water pump diffuser controls the flow of water leaving the pump.
• Magnet housing. The pump magnet housing attaches inside the motor housing and covers the drive magnet that turns the impeller.
• Pump overhaul kit. The pump overhaul kit includes the parts needed to rebuild the pump. Refer to the parts diagram for a complete list of parts included.

Troubleshooting your Pro Source pump when the motor won't run

• Make sure that the power switch is turned on.
• Check for power. Check the circuit breaker for the pump and reset the circuit breaker if it's tripped.
• Disconnect electrical power and check wiring connections on the switch and motor. Reconnect any loose wires and repair any broken wires.
• If wiring is okay, you may need to replace the switch or the pump motor.