Official Troybilt electric line trimmer parts

Avoiding excessive cutting line usage in your TroyBilt electric line trimmer

• Always use the cutting line size that is recommended for your line trimmer. Using cutting line with a smaller diameter than recommended can cause excessive line usage.
• Carefully follow the owner's manual instructions to properly wind line around the line spool and route the line through the cutting head to avoid excessive line usage.
• Don't crowd the cutting line against the ground or other objects such as tree trunks or edging when trimming. Cut grass using the tip of the cutting line.
• Examine the cutting head and spool before each use of the line trimmer. Replace any worn or damaged parts before using the line trimmer.

Common TroyBilt electric line trimmer replacement parts

• Trigger switch. The trigger switch turns the electric motor on and off to control cutting head motion on the line trimmer.
• Cutting head. The cutting head houses the cutting line and spins to allow the cutting line to cut grass when the motor runs. The cutting head also controls cutting line length.
• Power cord. The power cord supplies electrical current to the trigger switch and motor to spin the cutting head.
• Cutting line. The cutting line that is initially installed in the cutting head of the trimmer will eventually be used up. Replacement cutting line is available in various sizes. Replace the cutting line with the proper size for your grass line trimmer.