CONFIRM THE PART FITS
Lawn Tractor Blade Idler Pulley (replaces 193197, 5321931-97) 177968
Part #177968
Part Information
This blade idler pulley (part number 177968) is for lawn tractors.
Blade idler pulley 177968 applies tension to the blade belt, allowing the belt to turn.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $22.02 |19% OFF Phone Price : $27.02
- $5.98 |60% OFF MSRP : $15.00
- $3.59 |22% OFF Phone Price : $4.59
- $3.99 |20% OFF Phone Price : $4.99
- $29.39 |15% OFF Phone Price : $34.39
- $40.92 |22% OFF MSRP : $52.50
- $7.19 |12% OFF Phone Price : $8.19
- $8.35 |11% OFF Phone Price : $9.35
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #96026000100 Weed Eater rear-engine riding mower | 96026000100 | Mower deck |
Model #96026000201 Weed Eater rear-engine riding mower | 96026000201 | Mower deck |
Model #WELRVBA30 Weed Eater rear-engine riding mower | WELRVBA30 | Mower deck |
Model #WELRV1 Weed Eater rear-engine riding mower | WELRV1 | Mower deck |
Model #960420219 Craftsman front-engine lawn tractor | 960420219 | Mower deck |
Model #917989250 Craftsman front-engine lawn tractor | 917989250 | Mower deck |
Model #RZ4219BF-966582201 Husqvarna rear-engine riding mower | RZ4219BF-966582201 | Mower deck/cutting deck |
Model #966809001 Husqvarna rear-engine riding mower | 966809001 | Mower deck/cutting deck |
Model #966455801 Husqvarna rear-engine riding mower | 966455801 | Mower deck/cutting deck |
Model #RZ4219-966809001 Husqvarna rear-engine riding mower | RZ4219-966809001 | Mower deck/cutting deck |
Reviews
Direct replacement
Fits perfect, works great.
Jason, Punta Gorda Florida
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Part numbers
Wrong part number this is a 3inch or thereabouts. I needed the 5inch and thereabouts. I got three of them until I checked with the local repair shop. And found that the part numbers are switched. Good luck.
Oops, Colorado
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Finally got part ordered! Ok
Upset that it took a month to finally recieve my part, 4 times ordering & sending back wrong parts and paying for 4 orders, finally got right part. Kept sending 5 3/8 for 3 3/8". You cannot fit a 5 in a 3" whole.I talked to 10 people(1) 3 times! Frustrating if substituting everybody should know about it and what correct number is for right part! They were all nice to talk to but somebody dropped the ball with our order number and the grass grew and grew in our yard and every time we had to call, order and pay again, mail back the wrong part 3 times, before we received the right part. 30 minutes to put part on! Hallelujah, Praise the Lord !!! 63 years married, no divorce! Oh, happy day! Have a blessed day everybody, no matter which side you be on! We purchased before but only had to exchange (1) time!
Maxine, South Carolina
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
I'm a woman over 60
At first I thought it was going to be difficult because I no nothing about this mower so I just put the serial number in match it with the part the system let me know if it fist or not
Jean, Nashville Tennessee
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Hard to tell parts apart.
I got the wrong part. It is difficult to read the diagrams to know which part is which and the descriptions for the parts are so similar it is hard to tell them apart.
sonofbr, ut
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
first pulley part number didn't match the diagram.
Should be titled blade belt tensioner pulley. Sheila still hasn't sent a return shipping label! She was more focused on up selling home improvements and now my email is flooded with A/C projects. The product was easy to install, less than 5 min.
Greg, Yuma,AZ.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Failure to inform consumers of design change
The original pulley was about 5 1/4" in diameter. The new pulley is 3 7/8". That means a new, shorter belt is required. With the 135 degrees of turn on the pulley the new belt should be about 98 1/2" or greater. Sears did not tell us that this part has changed until I pointed this out, then the agent stated that the new part was a "functional substitute." The description SHOULD mention that the new part may not be exactly the same as the part it is replacing.
Doug, Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
piece of cake
Took a little longer than expected to get it. But it all worked out.
Stan, Bandera Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend