Can’t find your part?   Contact us:+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Rikon Drill presses

Official Rikon drill press parts

Rikon drill presses set the standard for top performance with powerful drive motors and rugged drilling components. You'll always be pleased with the results you get when using your Rikon drill press. When parts wear out or break on your Rikon drill press, find the replacement parts you need at Sears PartsDirect.

Locking the chuck at the desired depth on your Rikon drill press

  • Unplug the drill press to disconnect electrical power.
  • Turn the feed handles until the drill press chuck is at the desired depth.
  • Hold the feed handles at the desired position.
  • Turn the stop nut located under the depth stop counterclockwise until it rests against the depth stop.
  • The chuck will now be help at this position when you release the feed handles.

Electrical safety precautions to follow when using your Rikon drill press

  • The drill press power cord plug must match the receptacle on the electrical wall outlet. Never modify the drill press power cord plug in any manner. Don't use an adapter plug with an earth grounded drill press.
  • Don't expose the drill press to rain or wet conditions. Water entering the drill press will increase the risk of electric shock.
  • Check the condition of the power cord before using the drill press. Repair damaged wires in the power cord or replace the power cord if it's damaged before using the drill press.
  • When operating the drill press outdoors, use an extension cord rated for outdoor use to prevent the chance of electrical shock.
  • If operating the drill press in a damp location or around a water source, use a GCFI protected power supply.

Parts & More