Official Frigidaire range/microwave combo parts

Cleaning tips for the microwave in your Frigidaire range/microwave combo

• Wash microwave interior cavity surfaces often using warm, sudsy water and a sponge or soft cloth. Use only mild, nonabrasive soap. Rinse off soap using plain water then dry all surfaces thoroughly.
• Clean areas whether the door and oven frame touch when the door is closed.
• To remove stubborn stains inside the microwave oven cavity, boil a cup of water in the microwave for 3 minutes. Steam will soften the stubborn stains. Clean the stains with warm sudsy water then rinse all surfaces with a cloth moistened with plain water. Dry all surfaces thoroughly.
• Wash the turntable and turntable support whenever spills fall on the turntable and/or support.
• Wipe down the outside of the microwave cabinet using a soft cloth moistened with mild detergent. Rinse off detergent using a soft cloth moistened with plain water. Dry all cabinet surfaces completely.

How to replace the oven temperature sensor in your Frigidaire range/microwave combo

• Shut off electrical power to the range.
• Remove the oven racks.
• Remove the screws from the base of the temperature sensor probe.
• Carefully pull the oven temperature sensor probe forward into the oven interior. The wires connected to the probe have enough slack that you can pull it a just few inches. Holding the connector with needle-nose pliers, depress the locking tab on the plug and disconnect the plug from the sensor probe. Don't let the connector slip back through the hole, or you must remove the back panel of the oven to retrieve it.
• While holding the connector with a pair of needle-nose pliers, snap it into the plug of the new probe. Push the wire into back wall of the oven. Position the new sensor probe and line up the holes for the mounting screws. Insert the mounting screws and tighten firmly using a nut driver.
• Reinstall the oven racks and restore electrical power to the range.