CONFIRM THE PART FITS
Exercise Cycle Crank Bearing Set 176991
Part #176991
Part Information
This crank bearing set (part number 295560) is for exercise cycles.
Crank bearing set 295560 supports the crank and pulley.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $98.99 |11% OFF Phone Price : $110.99
- $123.99
- $17.09 |10% OFF Phone Price : $19.09
- $36.99 |14% OFF Phone Price : $42.99
- $17.99
- $24.89 |19% OFF Phone Price : $30.89
- $222.07
- $15.38 |12% OFF Phone Price : $17.38
- $16.49
- $15.38 |12% OFF Phone Price : $17.38
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WL078020 Weslo exercise cycle | WL078020 | Unit parts |
Model #WL078021 Weslo exercise cycle | WL078021 | Unit parts |
Model #WL078022 Weslo exercise cycle | WL078022 | Unit parts |
Model #831287560 Lifestyler exercise cycle | 831287560 | Unit parts |
Model #PF410021 Proform exercise cycle | PF410021 | Unit parts |
Model #831287561 Proform exercise cycle | 831287561 | Unit parts |
Model #PF410020 Proform exercise cycle | PF410020 | Unit parts |
Model #PF410022 Proform fitness & exercise | PF410022 | Unit parts |
Model #831288141 Lifestyler exercise cycle | 831288141 | Cardiofit |
Model #831288140 Lifestyler exercise cycle | 831288140 | Unit parts |
Reviews
Easy to install
Took about 30 minutes, make sure bearings are orientated right and pedals move freely
Dn4155, Syracuse, in.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Incorrect parts
When I went to install the bearing two of the four inside races where suppose to have a different Inside diameters to fit correctly. I had to use both of the old inside races in order to use these bearing. I hope they last a little while.
arn52, Milbank SD
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Experience was an asset here.
This one takes special tools and patience. I give this one a low overall rating because of difficulty and the need for specialized tools. The outer race was easy enough to remove but the inner race was the challenge. I removed mine with a hammer and punch; it was on there very tight and it took several complete rotations before the threads started to move easy enough to finish by hand. It would have been nice if there had been some written instructions telling you where you would find left hand threads and how to adjust the bearing load. I would recommend adding additional grease - on the races before assembly and extra on the bearings too.
Pete, Portland Me.
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
good quality
No directions. Need to include a drawing to indicate if the bearing go in or out and a packet of heavy grease.
Will, Sacramento, CA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
If you have worked on bikes stright forward
I had to fab a simple press with a C-clamp to install the outer bearing races, as was expected. It went together very well.
Robocidal M, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Stationary bike
This was exactly what I needed to fix my stationary bike.
Rgoodwin, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Bearings
I been using my exercise bike for many years. I always kept extra parts-including bearings-just in case they wear out.
Mickey1948, Bryant, AR
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Couldn't believe Sears part direct have in stock.
Purchase bearing for my indoor bicycle form this wed site. perfectly fit. Couldn't believe they have it in stock. Only this site/store has it. Came on time. Bought parts for my washer before. Will purchase from this site again.
Handyman e, Brooklyn New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend