Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
ICP Wall heaters

Official ICP wall heater parts

ICP wall heaters are known for delivering the comforting heat you need in cold winter months. ICP wall heaters use the latest technology to ensure that your rooms get heat quickly. When your ICP wall heater needs repair, find the replacement parts you need to fix the heater at Sears PartsDirect.

Safety instructions for your ICP wall heater

  • Carefully follow all installation instructions to properly and safely install the wall heater in a suitable location.
  • Only mount the heater in a vertical position. Don't attempt to mount the heater horizontally.
  • Mount the heater at least 6-inches above the floor and no closer than 12-inches from the adjacent wall.
  • Don't mount the heater over a bathtub or shower stall enclosure.
  • Don't block the wall heater by mounting it under a towel rack or behind a door.
  • Read and follow all operating and safety instructions in the owner's manual.

How to replace the temperature control thermostat on a ICP wall heater

  • Unplug the heater power cord or shut off the house circuit breaker for the heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
  • Remove the temperature control knob from the temperature control thermostat stem.
  • Remove the front grille cover from the heater.
  • Remove the temperature control thermostat mounting screws and pull the thermostat out slightly.
  • Disconnect the wires from the temperature control thermostat and pull the thermostat out.
  • Connect the wires to the new thermostat and mount the new thermostat in the heater.
  • Reassemble the wall heater and restore electrical power by plugging in the power cord or resetting the house circuit breaker.

Parts & More