Blenders logo

Official Blender parts

Have you noticed that your blender fails to turn on or seems to be malfunctioning? Blenders rely on each part being fastened securely in place, and if one piece comes loose, it may cause your unit to leak, work slower than normal or perhaps not turn on at all.

What are some common parts of a blender that may need replacing?
  • Speed selector: The speed selector allows you to choose the mixing speed that you need. Inside the housing assembly, each switch is wired to the motor. If these wires come loose or break off, it will affect the speeds at which the blender can operate.
  • Inline fuse: The inline fuse is a built-in safety device to prevent the blender from overheating and damaging internal components. If this fuse blows, it will need to be replaced before the blender can be used again.
  • Motor: The motor is located inside the main housing and is controlled by the speed selector. The motor on some blenders may spin at speeds exceeding 20,000 rpm, so this can put a lot of stress on the motor. However, motors can be serviced or replaced so that you don’t need to buy a whole new blender.
  • Drive stud: The drive stud is connected to the motor and, in turn, connects to the mixing blade. Each piece needs to be connected securely to each other, and when operating an appliance at such high speeds, they may wear out over time and need to be replaced. If one or more of these pieces becomes loose or worn, replace them to restore your blender to working condition.
  • Blender assembly: The blender assembly sits on top of the housing and connects to the blender jar. Each piece needs to be firmly in place for the blender to operate properly.
  • Housing: The housing holds the motor, drive stud and speed selector. Make sure that rubber seals are intact. This prevents liquid from entering the housing and potentially damaging the inner parts.

Parts & More

Downdraft Ventilation System
GE Downdraft ventilation system Parts
Riding Mowers & Tractors
Toro Riding mowers & tractors Parts