CONFIRM THE PART FITS

Switch 3392266

BEST SELLER

Part #3392266

Replaced by #W10820036
?
Manufacturer substitution
This part replaces 3392266. Substitute parts can look different from the original.
Online Price
$24.03
35% OFF MSRP : $37.00
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This door switch kit (part number W10820036) is for laundry appliances.

Door switch kit W10820036 prevents the dryer or washer from starting if the door or lid is open. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.

Unplug the appliance before installing this part. Wear work gloves to protect your hands.

Reviews

Possibly ordered wrong part.
November 25, 2022

Part not installed due to existing switch a consistent connection when door is closed. As I mentioned, the possibility of the sensitive main rotary push/pull switch being the issue, to the technician, they were positive that it was the interlock switch. I'll return the interlock switch and do more research. thank you.

Glenn C, California

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Need better instalation guide
January 03, 2022

It was a little difficult to install and tge instructions included didn't explain how to fit the switch, actuator, and guard together.

Wayne, Brooklyn NY

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Defective Part.
January 12, 2021

It was no problems installing. The only issue it that the switched failed. I purchased it in 12/28/20. Can you tell me if there is a warranty on that part. If so what is the return procedure.

Diandre, Baltimore,Md

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install
June 01, 2019

It was easy to install. Release the dryer top and prop it open. Two screws hold the switch. Change the crimp wire terminals on the two leads. Install the new part. Put the top down. Test dryer for proper operation. Done

Tony o t h, New York

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Doesn't look like original part
July 16, 2018

Although the part was the one specified for my washer, it was not shaped the same as the one I needed to replace and I couldn't figure out a way to adapt it to work. I wound up defeating the existing switch so the spin cycle would work, and we're back in business again. Next time there's a problem, it's likely I just buy a new washer.

Robby62, Memphis, TN

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
30 minutes - 1 hour
First time
July 16, 2018

First time I ever took a wash machine a part to replace a part come to find out it was not hard at all the part was easy to install and the diagram that they sent me was a great help

Fixed23, Detroit Michigan

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
Easy to install
June 09, 2018

Spade terminals on old switch were corroded green . Inside switch apparently the same. New wire connectors were included. Easy repair with basic tools

TimJ, Youngstown Ohio

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes