CONFIRM THE PART FITS
Range Oven Control Board 316577048
Part #316577048
Part Information
This oven control board (part number 316577048) is for ranges.
Oven control board 316577048 monitors the temperature and controls the oven heat.
Unplug the range or shut off the house circuit breaker for the range before servicing the unit. Wear work gloves to protect your hands.
Frequently Used Together
- $15.89 |11% OFF Phone Price : $17.89
- $31.81 |14% OFF Phone Price : $36.81
- $7.39 |12% OFF Phone Price : $8.39
- $38.84 |11% OFF Phone Price : $43.84
- $7.39 |12% OFF Phone Price : $8.39
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #79048022801 Kenmore Elite electric wall oven | 79048022801 | Control panel |
Model #79048029801 Kenmore Elite electric wall oven | 79048029801 | Control panel |
Model #79048023801 Kenmore Elite electric wall oven | 79048023801 | Control panel |
Model #79048023800 Kenmore Elite electric wall oven | 79048023800 | Control panel |
Model #79048029800 Kenmore Elite electric wall oven | 79048029800 | Control panel |
Model #79048022800 Kenmore Elite electric wall oven | 79048022800 | Control panel |
Reviews
Straight forward installation
Easy to install, suggest you take a picture of the old controller before you remove the connections. There are a few more connectors than I anticipated and not all of the connections on the board are used. You can figure it out, but a picture would make the swap a piece of cake.
RonD., San Antonio
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
The board was installed in an kenmore elite wall
Took about 20 minutes to install board. First step was to turn off the power and then remove screws securing oven to wall. Pull the oven out from the wall and supporting it from the bottom (I used two tool boxes plus a cardboard box). Removed 6 screws (all screws are square drive) from the control sheet metal cover and then the 4 screws holding the control panel to the oven. Take a pic of the back of the control panel so you can make sure you re-attach the correct wires. Be sure to press the tab release on the wire connectors as you pull them off.
Donald's w, Tallahassee
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes