Lawn Mower Wheel 532750500
Part #532750500
Part Information
This wheel (part number 532750500) is for lawn mowers.
Wear work gloves to protect your hands when installing this part.
Reviews
Wheel not as pictured
Wheels had about 3/8" extra material on the inside - had to trim with a dremel tool to make them fit. Once trimmed they were very easy to install
jackie27, North Dakota
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
They fit.
The only problem i had was i thought the wheels were gray, but they were white, now i have to order two more so they can match.
Undisclosed, Chicago
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Substitute sent without warning.
White substitute wheels are being shipped. The hubcaps do not fit the substitute wheels. I was willing to pay extra for the original wheels as advertised. I did not attempt an install and have returned the wheels without taking them out of the box, but it still cost me $13 for something I would not have ordered if the substitute was mentioned on the site.
Inconvenienced, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Had to do some sanding on the plastic to fit it
Took me about 15 minutes to install with some sanding
Bone, North iowa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Hub Length Too Long
Original hub length is 1-3/8'. These wheels have a hub length of 1-1/2'. This prevents the installation of the washer and cotter pin. Buyer required to shave 1/8' of hard plastic from hub.
Handyman1300, Columbus, OH
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
NOT an exact fit
The length of the axle is 1 3/8" but the wheel has an axle bore width of 1 1/2". Had to "rig" up the securing hardware to make it fit.
Fillski, Milwaukee, WI
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Great Replacement tires for an old mower!
It only took 20 minutes and my mower is as good as new.
Weazer777, Clifton, NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Both rear wheels need to be replaced, because of wear
ddklinker, Example: New York, NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes