CONFIRM THE PART FITS

Washer Water-Level Pressure Switch WH12X10412

BEST SELLER

Part #WH12X10412

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This water-level pressure switch (part number WH12X10412) is for washers.

Water-level pressure switch WH12X10412 senses and controls the water level in the washer.

Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #GTWN4950L1WS GE washerGTWN4950L1WS
Controls & backsplash
Model #GPRE8350K3WT GE washerGPRE8350K3WT
Controls & backsplash
Model #WPRE6150K2WT GE washerWPRE6150K2WT
Controls & backsplash
Model #GLWN5050M1WS GE washerGLWN5050M1WS
Controls & backsplash
Model #WPRE6150K1WT GE washerWPRE6150K1WT
Controls & backsplash
Model #WPRE6150K0WT GE washerWPRE6150K0WT
Controls & backsplash
Model #GCWN4950D0WS GE washerGCWN4950D0WS
Controls & backsplash
Model #GRWN5150M1WS GE washerGRWN5150M1WS
Controls & backsplash
Model #WPRE8150K0WT GE washerWPRE8150K0WT
Controls & backsplash
Model #PTWN6050M0WT GE washerPTWN6050M0WT
Controls & backsplash

Reviews

Easy to install.
November 15, 2020

Easy to install and got washer back working. We had to replace the water lever part.

WashGE, Long Island NY

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Works well once you figure out how to install it!
January 14, 2020

This part was an exact match for the part I needed to replace, It fit perfectly and worked just fine once installed. The only problem was there were no removal and installation instructions provided with the part. I found a YouTube instruction video which walked me through removal and installation which was very helpful. Without this removal and installation of the part would have been a very difficult guessing game, The link to the video is as follows: https://www.youtube.com/watch?v=vt49b_bNPD0 Sears parts direct would do well to provide an indication where to find information for removal and installation instructions for this part when they ship it. The part was in stock and arrived quickly. I would recommend this replacement product and Sears Parts Direct as a supply source.

DIYer720, Undisclosed

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Easy to install
September 04, 2019

Very easy to install and upgrade to idler to roller instead of the original idler

Bob2020, Nashville

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour
No easy to install.
October 23, 2018

Looking at the drawing it looked like I only had to take three screws out of the back plate then remove the control cover. I did not realize I had to take the machine apart. I had to remove the front panel, unbolt the top lid, take wiring harness clip off, remove sensor clip. Remove lid then unbolt unit the pressure switch sets to get to the clip that secures the switch from the back side. I thought it would be easy.

Don 2, Ontario, Ohio

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
More than 2 hours