CONFIRM THE PART FITS
Lawn & Garden Equipment Engine Carburetor (replaces 495426, 495951, 692784, BS-495426, BS-498298) 498298
Part #498298
Part Information
This carburetor (part number 498298) is for lawn and garden equipment engines.
Carburetor 498298 mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Frequently Used Together
- $5.03 |17% OFF Phone Price : $6.03
- $9.80 |10% OFF Was : $10.89
- $11.34 |15% OFF Phone Price : $13.34
- $9.89 |9% OFF Phone Price : $10.89
- $30.02 |17% OFF Phone Price : $36.02
- $20.38 |23% OFF Phone Price : $26.38
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #134204-1115-E1 Briggs & Stratton lawn & garden engine | 134204-1115-E1 | All parts |
Model #135200-135299 (0913) Briggs & Stratton lawn & garden engine | 135200-135299 (0913) | Carburetor |
Model #134202-0114-01 Briggs & Stratton lawn & garden engine | 134202-0114-01 | All parts |
Model #135200-135299 (1299) Briggs & Stratton lawn & garden engine | 135200-135299 (1299) | Carburetor |
Model #135200-135299 (1050) Briggs & Stratton lawn & garden engine | 135200-135299 (1050) | Carburetor |
Model #135200-135299 (0620-0626) Briggs & Stratton lawn & garden engine | 135200-135299 (0620-0626) | Carburetor |
Model #134202-1114-E1 Briggs & Stratton lawn & garden engine | 134202-1114-E1 | All parts |
Model #135200-135299 (1159) Briggs & Stratton lawn & garden engine | 135200-135299 (1159) | Carburetor |
Model #135200-135299 (7003) Briggs & Stratton lawn & garden engine | 135200-135299 (7003) | Carburetor |
Model #134202-1119-E1 Briggs & Stratton lawn & garden engine | 134202-1119-E1 | All parts |
Reviews
Carburetor for a tiller
It was not the same carburetor I took off it was different in a lot of ways I did get it back on but it did not help I guess what my problem was because it still not running
Betty, Ohio
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
somewhat easy to install with some changes
One bell crank from old Carburetor the hole was not tapped. other than that one problem easy replacement. about 30 minutes.
hall, Pahrump Nv.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
This model carb is complicated and took 3-4 hours
Take pictures of linkage prior to removing old carb
Mjablon123, Spring TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour