$2.49 |
29% OFF Phone Price : $3.49
CONFIRM THE PART FITS
Part Information
This bearing (part number 42844) is for lawn tractor attachments.
Follow appropriate safety practices when installing bearing 42844.
Frequently Used Together
- $85.21 |6% OFF Phone Price : $90.21
- $6.38 |22% OFF MSRP : $8.20
- $32.33 |13% OFF Phone Price : $37.33
- $24.83 |17% OFF Phone Price : $29.83
- $24.79 |17% OFF Phone Price : $29.79
- $2.49 |29% OFF Phone Price : $3.49
- $162.99
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #486248373 Craftsman snowblower attachment | 486248373 | Auger & housing/chute |
| Model #LST42C Agri-Fab accessory | LST42C | Auger housing/impeller/chute |
| Model #45-04911 Agri-Fab snowblower attachment | 45-04911 | Auger & housing/chute |
| Model #LST42D Agri-Fab accessory | LST42D | Auger housing/impeller/chute |
| Model #486258401 Craftsman snowblower attachment | 486258401 | Auger & housing/chute |
| Model #486248374 Craftsman snowblower attachment | 486248374 | Auger & housing |
| Model #48624853 Craftsman snowblower attachment | 48624853 | Housing/chute/pulley v type 9" |
| Model #48624838 Craftsman snowblower attachment | 48624838 | Housing/spiral/gear |
| Model #45-0418 Agri-Fab gas snowblower | 45-0418 | Housing/spiral blades/engine |
| Model #486248381 Craftsman snowblower attachment | 486248381 | Housing/spiral/gear/chute |
Reviews
Pulley was hard to ge off./
I had to cut pulley off auger shaft using a small grinder, to get the shaft out of the blower housing so I could replace bearing. Heated pulley housing and then removed it from the blower shaft after I got it out and could get to it. Put it all back together with anti seize for next time.
Barn p, Barnesville Mn.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
New bearing and bushings
Very simple; Left the blower on the tractor, removed the belt, the pulley nut, the 6 bolts for the front auger, the center support 3 nuts behind the pulley, removed the auger assembly, replaced the bearing and bushing and reassembled. Done in about 45 minutes
Steve S, NH
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour