Official Ryobi lawn tractor attachment parts

Attaching a Ryobi snow blade to your lawn tractor

• Remove the lawn tractor hood.
• Remove the browning shield from the front of the lawn tractor frame. Support the browning shield as you remove the last bolt to prevent the browning shield from falling.
• Fasten the right-hand hanger bracket to the mounting holes on the lawn tractor frame. Install the left-hand hanger bracket then tighten all bolts firmly.
• Reinstall the browning shield on the tractor frame.
• Install the angle support brackets on the hanger brackets but don't tighten the fasteners.
• Install the pivot support bracket on the angle support brackets then tighten the angle support bracket bolts. Tighten the pivot support bracket bolts.
• Install the angle lock bars then install the angle lock spring and tighten the angle lock bar bolts. Attach the control cable assembly.
• Attach the blade to the channel assembly then install the blade on the lawn tractor.

Long-term storage tips for your Ryobi lawn tractor attachments

• Clean the lawn tractor attachments thoroughly before storing. Use a pressure washer to remove caked on dirt or residue. Blow the lawn tractor attachments dry using compressed air.
• Lubricate all moving parts of the lawn tractor attachments with grease or oil. Fill all bearings and gear cases with grease according to the instructions in your owner's manuals.
• Sand down all rust spots and apply touch-up paint to cover all bare metal spots on the lawn tractor attachments.
• Store the lawn tractor attachments indoors in dry areas to help prevent rust.