Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
GE Freestanding ice makers

Official GE freestanding ice maker parts

GE freestanding ice makers produce crystal clear ice cubes quickly and efficiently. Sturdy components inside GE ice makers typically last for years but part failures can happen at any time. When your GE freestanding ice maker isn't producing ice as it should, find the replacement parts you need to fix the ice maker at Sears PartsDirect.

Showing 41-60 of 117
1
2
3
4
5
GE ZDIS15CSSC ice cube maker
94 parts
GE ZDIS15CKSS ice cube maker
82 parts
GE ZDIS15CFSS ice cube maker
95 parts
GE ZDI15CKWW ice cube maker
80 parts
GE XPIOX3SC2SS freestanding icemaker
0 parts
GE XPIOX3BC1BT ice maker
0 parts
GE OPAL01GEN1SS freestanding icemaker
0 parts
GE P4INAASST1SS freestanding icemaker
0 parts
GE XPIOX3BC2BT icemaker
0 parts
GE XPIO13BCCBT freestanding icemaker
0 parts
GE OPAL01GEPKT freestanding icemaker
0 parts
GE OPAL01GEN1KT freestanding icemaker
0 parts
GE OPAL01GEP1KT freestanding icemaker
0 parts
GE XPIO13SCBSS icemaker
0 parts
GE XPIOX3SC1SS ice maker
0 parts
GE XPIO23SC2SS freestanding icemaker
0 parts
GE XPIO13SCCSS freestanding icemaker
0 parts
GE XPIO13BCBT freestanding icemaker
0 parts
GE XPIO13BCBBT freestanding icemaker
0 parts
GE XPIO23BC2BT freestanding icemaker
0 parts
Showing 41-60 of 117
1
2
3
4
5
Back to top

Cleaning your GE freestanding ice maker with cleaning solution

  • Order the ice maker cleaning solution for your freestanding ice maker.
  • To begin the cleaning process, press the On/Off button on your ice maker. Wait for 5 to 10 minutes for the ice to fall into the storage bin then remove all ice from the storage bin.
  • Unscrew the drain cap from the bottom of the water pan and drain all water from the water pan.
  • Reinstall the drain cap on the water pan.
  • Pour the cleaning solution into the water pan then dilute the solution with 2 bottles of water.
  • Press the Clean button to start the cleaning cycle.
  • After the clean cycle, check for cleaning solution in the water pan. Repeat the clean cycle if cleaning solution remains in the water pan after the cleaning cyle.
  • Press the On/Off button to resume ice production after cleaning is complete.

Top replacement parts for GE freestanding ice makers

  • Ice bin thermistor. The bin thermistor senses the temperature at the Full mark in the storage bin and communicates the temperature to the electronic control board through a wire harness connection. When the electronic control board senses that the ice storage bin is full based on the bin thermistor reading, it stops ice production until the level of ice drops below the Full mark.
  • Drain pump. The drain pump moves water out of the reservoir when the reservoir is flushed periodically to remove impurities and to remove water from ice that’s slowly melting in the ice bin.
  • Condenser fan motor. The condenser fan motor pulls air through the condenser to cool the hot refrigerant gas so it condenses to a liquid. The cool liquid refrigerant flows through the evaporator plate in the ice maker. In the low-pressure environment of the evaporator plate, the liquid refrigerant from the condenser evaporates to a gas. During this evaporation process, the refrigerant absorbs heat from the water that’s cycling across the top of the evaporator plate, and the water freezes.
  • Evaporator thermistor. The evaporator thermistor senses the temperature of the evaporator plate to detect the thickness of the ice slab forming on the evaporator plate during the ice-making process. It communicates the evaporator temperature to the electronic control board through a wire harness connection. When the slab is thick enough to be cut into cubes, the electronic control board initiates that process, based on the evaporator thermistor’s temperature reading.

Parts & More

Fitness & Exercise
Fitness & exercise Parts