$54.93 |Â
8% OFFÂ Phone Price : $59.93
CONFIRM THE PART FITS
Washer Gear Case W11035747
Part #W11035747
Replaced by #W11454372
?
Manufacturer substitution
This part replaces W11035747. Substitute parts can look different from the original.
Online Only Price
$244.54 |Â
$10.00 OFFÂ Phone Price : $254.54
In Stock
For ZIP codes near Edit
Part Information
This gear case (part number W11454372) is for washers.
Gear case W11454372 drives the agitator and spins the basket in the washer.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $33.59 |Â13% OFFÂ Phone Price : $38.59
- $27.08 |Â23% OFFÂ MSRP : $35.00
- $58.04 |Â13% OFFÂ MSRP : $67.00
- $61.58 |Â14% OFFÂ Was : $71.58
- $89.64 |Â25% OFFÂ MSRP : $120.00
- $37.80 |Â37% OFFÂ MSRP : $60.00
- $201.35 |Â8% OFFÂ MSRP : $220.00
- $4.89 |Â67% OFFÂ MSRP : $15.00
- $113.30 |Â24% OFFÂ MSRP : $150.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MVWX550XW2 Maytag washer | MVWX550XW2 | Gearcase, motor and pump parts |
| Model #11021492311 Kenmore washer | 11021492311 | Gearcase, motor and pump parts |
| Model #WTW4955HW0 Whirlpool washer | WTW4955HW0 | Gearcase, motor and pump parts |
| Model #WTW4855HW2 Whirlpool washer | WTW4855HW2 | Gearcase, motor and pump parts |
| Model #7MWTW4925EW1 Whirlpool home | 7MWTW4925EW1 | Gearcase, motor and pump parts |
| Model #WTW4915EW0 Whirlpool washer | WTW4915EW0 | Gearcase, motor and pump parts |
| Model #11025102311 Kenmore washer | 11025102311 | Gearcase, motor and pump parts |
| Model #7MWTW5500XW2 Whirlpool washer | 7MWTW5500XW2 | Gearcase, motor and pump parts |
| Model #7MMVWC417FW0 Maytag washer | 7MMVWC417FW0 | Gearcase, motor and pump parts |
| Model #WTW4915EW1 Whirlpool washer | WTW4915EW1 | Gearcase, motor and pump parts |
Reviews
Wrong part
After being backordered for 2 months, the part didn't fit as changes had been made to it. The seal was too big and the shaft too short.
Mark, Farmington,MO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy but be careful of the change in construction
This is easy to install compared to other Whirlpool/Kenmore because it has the retaining clip for the basket. This gearcase is apparently changed form the original and seems less durable and the shaft is different as well. I had to order a drive hub kit because the original does not fit the same. This should be noted when you order the part.
David F, Fishers, In
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not super easy but identical part and works perfec
Took about an hour was more work taking unit outside to have room
Marmar, Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Watching video of repair made the process very eas
Gearbox bearings went dry made a Bad noise when spinning replacement of gear after watching the video made process easy
Big d 1, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Is was easy to install take a round the 2:00 hrs the Look like new
Pinocho, Denver
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Clean Cloths Agai
The repair was relatively easy. There are enough YouTube. Hardest part was figuring out how the starting capacitor was attached to the old unit. After that it went in without a problem.
Bosh, New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Worked like a charm
The part delivered as expected. The change out was pretty simple and didn't take long at all.
dybarra5, San Antonio, Tx
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Machine like new with these parts
Replaced Gear Case due to bearing failure. Replaced the Accuator also, due to not shifting into spin cycle. Everything on YouTube for step by step process in replacing parts. New Machine now!
Tom100, Cape Girardeau, Mo
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour