CONFIRM THE PART FITS

Home  >  Impeller

Impeller 303836

★★★★★★★★★★
5
7
4
1
3
0
2
0
1
0

Part #303836

Replaced by #Y303836
?
Manufacturer substitution
This part replaces 303836. Substitute parts can look different from the original.
Online Only Price
$22.39 | 
18% OFF 
Phone Price: $27.39
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This blower wheel (part number Y303836) is for dryers.

Blower wheel Y303836 attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #GDE810 Maytag dryerGDE810
Motor, blower, base frame & thermostats
Model #LDG810 Maytag dryerLDG810
Motor, blower, base frame & thermostats
Model #LDE710 Maytag dryerLDE710
Motor, blower, base frame & thermostats
Model #GDG110 Maytag dryerGDG110
Motor, blower, base frame & thermostats
Model #DE510 Maytag dryerDE510
Motor, blower, base frame & thermostats
Model #DE610 Maytag dryerDE610
Motor, blower, base frame & thermostats
Model #LDG710 Maytag dryerLDG710
Motor, blower, base frame & thermostats
Model #DG410 Maytag dryerDG410
Motor, blower, base frame & thermostats
Model #DE710 Maytag dryerDE710
Motor, blower, base frame & thermostats
Model #GDG710 Maytag dryerGDG710
Motor, blower, base frame & thermostats

Reviews

1-8 of 8 reviews
TJFW
Orchard, TXReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
TJFW• 2 years ago
Matched the original part exactly.

To replace the blower wheel the front of the dryer needs to be disassembled including the front of the duct assembly. Once this is completed it takes a couple of minutes to replace the Blower Wheel. The project will take a couple of hours.

none
Petaluma CAReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
none• 2 years ago
Came Quick

Be sure to use new clamp, and check cleances before closing it up.

kspring
Ossian, INReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
kspring• 2 years ago
Easy to install, quick and easy

Dryer was up and running in 15 min didn't need any special tool or instructions

Little jimmy
Phila pa.Reviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Little jimmy• 2 years ago
LIke a glove

Easy install, cause i had it apart about two weeks prior, took about 25 min. Works great just original part.

Gameah
Wells, MaineReviews 1Votes 0
★★★★★★★★★★
• 4 years ago
Gameah• 4 years ago
Solved the noisy dryer problem

Installing the dryer blower wheel was a very quick job. Most of the time was spent removing cabinet screws, housing screws, and being careful not to disturb the wiring harness. A single C clip held the blower wheel to the shaft along with a clamp on the wheel to maintain tightness to the shaft. Old off, new on, done. Basic tools and a bit of patience was all the job required.

gnoyes
massReviews 1Votes 0
★★★★★★★★★★
• 5 years ago
gnoyes• 5 years ago
easy to install

Easy to take apart, just keep track of the screws in an organized way so you know where they go back.

shapes
brooklyn nyReviews 1Votes 0
★★★★★★★★★★
• 5 years ago
shapes• 5 years ago
easy to install

Remember to put back all the screws, as many screws have to be taken out in order to install this

Miles j
CtReviews 1Votes 0
★★★★★★★★★★
• 3 years ago
Miles j• 3 years ago
New blower

Part fit as original would have been nice if snap ring was included

1-8 of 8 reviews