CONFIRM THE PART FITS

Home  >  Refrigerator Freezer Door Gasket

Refrigerator Freezer Door Gasket WP12550116Q

★★★★★★★★★★
5
2
4
3
3
0
2
0
1
2
BEST SELLER

Part #WP12550116Q

Online Price
$92.59 | 
7% OFF 
MSRP: $100.00
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

Special details: Smooth folds and creases in gasket WP12550116Q by soaking it in warm water or warming it with a hair dryer on low heat.

This freezer door gasket (part number WP12550116Q) is for refrigerators.

Freezer door gasket WP12550116Q creates a seal around the door to prevent warm air from entering the freezer compartment.

Safely store any food that could deteriorate while the door is open for this repair.

Reviews

Eddydotd
Melbourne FloridaReviews 1Votes 0
★★★★★★★★★★
• 1 year ago
Eddydotd• 1 year ago
Easy with a little patients.

Perfect fit, I removed the drawer by the release tabs on the rear of the drawer slides, laid it face down on towels pulled back the old strip and loosen all the 1/4 inch screws, do not remove them completely. Remove old strip clean the door and install the new strip do not use power driver to tighten screws.

Response from Sears PartsDirect:
CMG OFFLINE • 1 year ago

We are so thrilled you had a 5-star experience. Thank you for taking the time to leave us a rating. We thank you for choosing Sears Parts Direct for your part needs!

Jim G.
Los Angeles, CAReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Jim G.• 2 years ago
Fit perfectly

This part fit perfectly on my 15-year-old refrigerator/freezer. Perfectly replaced the old gasket that was deteriorating.

Goose
VirginiaReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Goose• 2 years ago
Exact fit.

Remove gasket. Loosen all screws 3 full turns. Useing a flathead screw driver gently slide the blade into to gap and slide it around the 4 sides to clean any old glue out. Then just work the gasket into the crack. If you still have trouble you can use a paint can opener from the inside to create the gap needed to work the tab into place. Then snug the screws back down.

Paul
Manitowoc, WIReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Paul• 2 years ago
Gasket installation

Watched video on installation, installation did not go as shown. I found out that totally removing the inside panel (~25 screws) made install more smooth. Took me about 2 hours, would have gone faster if I had help. Have refrigerator/freezer empty and unplugged, then you can take your time. Let new gasket lay flat for a day or two. Working great.

Soapnurse
Hahira. GAReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Soapnurse• 2 years ago
SLOW delivery

Perfect fit, easily installed but was on backorder 3 times. Meanwhile my freezer leaked cold air for 2 months.

Response from Sears PartsDirect:
SHS Social Care • 2 years ago

Hello, thank you for your rating and taking the time to share your experience we appreciate it and value your feedback. Thanks.

nuts
Winder,GaReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
nuts• 2 years ago
Wrong part again (for the third time)

Did not install. Returned part which was the third incorrect part that I received from you.

Response from Sears PartsDirect:
CMG OFFLINE • 2 years ago

we are sorry to hear that you did not have a positive experience with Sears. If you would like us to look into your situation further, please email us with your name, address, and phone number associated with your account. Thank you.

Chris 21
Silver Lake NHReviews 2Votes 0
★★★★★★★★★★
• 2 years ago
Chris 21• 2 years ago
Poor

The product had a poor magnet in it would not even seal very dissatisfy with it. Plus all the time spent installing it and then taking it back out and putting the old one back on.

Response from Sears PartsDirect:
CS Offline • 2 years ago

We are sorry to hear that you did not have a positive experience with Sears Parts Direct. If you would like us to look into your situation further for you, please visit www.SearsPartsDirect.com and click the chat option on the bottom right corner to speak with a Parts Direct chat representative.