CONFIRM THE PART FITS
Washer Spin Basket 3045ER0021D
Part #3045ER0021D
Part Information
This spin basket (3045ER0021N) is for washers.
Spin basket 3045ER0021N is the perforated tub that holds the laundry load inside the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Reviews
a FUN DIY but not for the timmid.
Start with lots of space to work. This is a large part and although I did it by myself a helping hand on some steps is best if you are not an able bodied shade tree mechanic. Be sure to replace all the bearing seal, bearings, and tub seal when you do this repair. I also replaced the shocks. When tightening all the bolts pay special attention to how tight they were to get off and do not over tighten or under tighten. This part came with the Spider bar attached and that has the most important bolt that ties it to the motor assembly. Make sure you use blue lock tight and as you tighten it may "POP" a few times. This is due to the bearings seating in the outer shell. I tried to seat them with a soft hammer as best I could but they are tight.
Coder, Oregon
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours