CONFIRM THE PART FITS
Lawn Mower Blade Debris Shield 532190754
Part #532190754
Part Information
This blade debris shield (part number 532190754) is for lawn mowers.
Blade debris shield 532190754 attaches above the blade to prevent debris from entering around the crankshaft pulley and drive belt.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #PR55Y21CHA Poulan gas walk-behind mower | PR55Y21CHA | |
| Model #PR65Y21MB Poulan gas walk-behind mower | PR65Y21MB | |
| Model #PR65Y21CB Poulan gas walk-behind mower | PR65Y21CB | |
| Model #PR55HY21CA Poulan gas walk-behind mower | PR55HY21CA | |
| Model #PR675Y21CHB Poulan gas walk-behind mower | PR675Y21CHB | |
| Model #917376770 Craftsman gas walk-behind mower | 917376770 | |
| Model #PR675Y21CHC Poulan gas walk-behind mower | PR675Y21CHC | |
| Model #917378441 Craftsman gas walk-behind mower | 917378441 | |
| Model #917378780 Craftsman gas walk-behind mower | 917378780 | |
| Model #PR55Y21CHC Poulan gas walk-behind mower | PR55Y21CHC |
Reviews
Parts
Unable to order the part that is displayed. Kept sending the wrong part.4 times
Blair, Rehoboth ma
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
A little confusing at first but...
The old plastic cover is discontinued and replaced with new belt protection metal guard. I used a bolt for that holds the mower and it aligned perfectly. This new part seems to be safer for keeping the belt on.
Ringgold J, Circleville OHIO
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Part was not as described
This was Not a debris Shield Just a little piece of metal for thirty bucks
MasterP, Tampa fl
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part was not as described
This was supposed to be a debris cover shield. All it was ,was a $30 little piece of metal which I honestly don't know what would do other than rip me off :(
MasterP, Tampa fl
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Debris Shield for lawn mower
This is NOT what I received. I sent the part back.
Undisclosed, Denver, CO
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Wrong picture of part
I would if I could. It's not the same picture of what I've got in the package
Clay W, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Belt guide, NOT debris shield
I ordered the debris shield but the replacement is not the same. This is only a belt guide, it does not serve exactly the same purpose of the debris shield, as is is much smaller than the shield and still allows clippings to interfere with the belt
MichelleS, Kansas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install.
Very difficult to remove arbor even with heavy duty puller. Destroyed the old debris shield while removing it to install the new belt. Actually easier to leave the arbor in place & cut the old plastic debris shield off and remove the old belt / install the new belt. Then install the new debris shield, allowing clearance for the new belt.
DuaneB, Motley, MN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours