CONFIRM THE PART FITS
Refrigerator Light Board EAV43060804
Part #EAV43060804
Part Information
Light board EAV43060808 is an original equipment manufacturer (OEM) part that fits some bottom-freezer refrigerators in these series: Kenmore and Kenmore Elite 795; LG LFC, LFX and LMX.
Light board EAV43060808 fits behind the light lens and has LED lights that illuminate the interior of the refrigerator compartment.
This light board uses a 12-volt DC power supply for the LED lights.
Replaces original bottom-freezer refrigerator light board part number EAV43060804.
Frequently Used Together
- $32.09 |13% OFF Phone Price : $37.09
- $55.95
- $96.22
- $98.27 |9% OFF Phone Price : $108.27
- $28.32 |15% OFF Phone Price : $33.32
- $44.07 |10% OFF Phone Price : $49.07
- $87.69 |5% OFF Phone Price : $92.69
- $71.46 |7% OFF Phone Price : $76.46
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #79578759802 Kenmore Elite bottom-mount refrigerator | 79578759802 | All parts |
Model #LFX25975SW/00 LG bottom-mount refrigerator | LFX25975SW/00 | Case parts |
Model #79578779800 Kenmore Elite bottom-mount refrigerator | 79578779800 | Case parts |
Model #79579753902 Kenmore Elite bottom-mount refrigerator | 79579753902 | Case parts |
Model #79571023010 Kenmore bottom-mount refrigerator | 79571023010 | Case parts |
Model #79571604012 Kenmore bottom-mount refrigerator | 79571604012 | Case parts |
Model #79571604010 Kenmore bottom-mount refrigerator | 79571604010 | Case parts |
Model #79578733805 Kenmore Elite bottom-mount refrigerator | 79578733805 | Case parts |
Model #79571023012 Kenmore bottom-mount refrigerator | 79571023012 | Case parts |
Model #79578773802 Kenmore Elite bottom-mount refrigerator | 79578773802 | Case parts |
Reviews
Appears to be Good Quality, but NO DIRECTIONS
Turn off the power, unplug the unit. Remove two phillips screws to the light fixture housing. The light fixture is still held in place by two tabs in the back of the fixture, and a 'male' plunger from the ceiling of the interior of the refrigerator. I was afraid I'd break the unit, but place the knuckles of your fingers against the roof, and firmly pull straight down on the side closest to you. REMEMBER the two tabs in the back, and don't pull too hard on them. Once you pull the plunger from the ceiling, you can pull the light fixture to you and remove it from the two tabs. Disconnect the electrical plug from the refrigerator. Find an ESD work area, and remove the two phillips head screws holding the circuit board to the light fixture. Replace, the LED Light board, secure with two screws. Connect the electrical connector. Place the light fixture tabs in place, press plunger into the ceiling, and secure with two screws. Plug it up, and test it out... voila!
JAMartin66, Seabeck, WA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Easy to install took 5 min. Plug and play really really easy
Lone W, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes