Can’t find your part?   Contact us:+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
  • Washer Timer 3946474R
  • Washer Timer 3946474R

Washer Timer 3946474R

5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Stars
1

Part #3946474R

If you choose to purchase a new product, please visit www.sears.com

This reconditioned/refurbished part has the same guarantee as a new part. The availability of a reconditioned part cannot be guaranteed. If the reconditioned part is not available you will receive notification within six business days.

Accessories normally included with new product purchases or listed in the owner's manual may not be included with this reconditioned product. The product may differ in appearance from the product image shown here. Only ground shipment is available for this item. This reconditioned/refurbished part has the same guarantee as a new part. The availability of a reconditioned part cannot be guaranteed. If the reconditioned part is not available you will receive notification within six business days.

At this time, this part is only available through Sears Home Service. If you would like to have this part installed by Sears Home Service, please call 1-800-4MY-HOME or click here to schedule an appointment for the repair. Only ground shipment is available for this item. And This reconditioned/refurbished part has the same guarantee as a new part. The availability of a reconditioned part cannot be guaranteed. If the reconditioned part is not available you will receive notification within six business days.

Part Information

This timer (part number 3946474R) is for washers.

Timer 3946474R controls the length of the different parts of the wash cycle such as filling, soaking, washing, spinning and rinsing.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Reviews

Higher Power
February 10, 2019

The machine would erratically stop agitating with all cycles & speeds, and the rinse cycle wouldn't open the softener compartment, and using a fist on the knob wasn't the best policy. The machine was new in 1994. This part, along with patience in extracting the two rusted front panel screws, opened new pathways to sartorial excellence, and I am now transferring my agitation to the clothing, where it belongs. Note the front knob unscrews; the front plastic shield(s) slide off, and expose the two mounting screws. PS replace the knob if it still has plastic threads; mine was good. The timer mounting screws (old) were of size 10-32; the new timer holes may be 5 mm, but I tapped the new timer to fit old screws. You may wish to use 5 mm if the old screws don't start in the threads. Also the lamp over the knob was burnt out; this is a good time to replace it. I wrote time spent as "1-2 hours", mostly spent slowly removing the two rusted screws. A half hour would be more accurate, given a newer machine. #winWin

moxy, Colorado

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
1 - 2 hours
Did not work as expected
December 01, 2018

Easy install but was agitating before the water was even in the tank. Sent back for refund

Frediw2, New Hampshire

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour