CONFIRM THE PART FITS
Part Information
This auger cable clamp (part number 762281MA) is for snowblowers.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #536881410 Craftsman gas snowblower | 536881410 | Handle & discharge |
| Model #536881400 Craftsman gas snowblower | 536881400 | Handle and discharge components |
| Model #536885200 Craftsman gas snowblower | 536885200 | Handle/discharge components |
| Model #536885201 Craftsman gas snowblower | 536885201 | 21`` 3.8hp handle & discharge compo |
| Model #536885202 Craftsman gas snowblower | 536885202 | Handle & discharge components |
| Model #536885203 Craftsman gas snowblower | 536885203 | Handle & discharge components |
Reviews
Not what I needed
There is no way to install this part. T he broken one has a mounting bolt or screw this part does not.
Chuck, Colorado
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
cable Clamp
Push cable through slot attach to holder attach cable ends
Bill 4, Oak park mich
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Took a few minutes to install, only basic tools required
4DES12837, Bloomingtion, IL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Saved the day!
Exact fit replacement parts, back to snow blowing in 15 minutes!
Snow b p, Livonia Mi
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Snowblower part
Replaced auger cable and tensioner. Parts fit perfect and easy to install
Don D, Anchorage Ak.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
I used a vice to hold the tensioner, but putting the clamp on was easy.
Hus23, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
A little tricky, but not that difficult to install
Easier to install if you remove auger cable tension bracket from snowblower first, paying close attention to how bracket is oriented and mounted on the snowblower. To replace or install the auger cable clamp: 1.) If you need to replace an existing auger cable clamp, clamp the bracket in a vise and use tools (eg...flat-blade screwdriver and a hammer) to gently tap the auger cable clamp to be replaced off of the bracket, noting how it is oriented on the bracket; 2.) place new auger cable clamp onto the wide-end of the bracket, aligning the slot in the clamp with the end of the bracket, and making sure the slot in the clamp is facing downward; 3.) then simply push or gently tap the clamp onto the bracket until it is fully seated. Reinstall the bracket with assembled auger cable clamp to the snowblower. Push the auger cable through the slot in the clamp, adjust cable tension with bracket, and secure bracket in place using the screw, washer, and locking-nut provided on the snowblower.
Withani, Dayton, OH
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Installing auger cable
The job to install cable/bracket took about 15 minutes to install and adjust.
Whitehead, Amherst,ny
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes