CONFIRM THE PART FITS
Refrigerator Flipper Assembly AGU72969101
Part #AGU72969101
Part Information
Helpful DIY instructions: Installation guide with video.
This flipper assembly (part number AGU75188619) is for refrigerators.
Flipper assembly AGU75188619 creates an airtight seal between the doors on a French-door refrigerator.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $71.46 |Â7% OFFÂ Phone Price : $76.46
- $46.37 |Â10% OFFÂ Phone Price : $51.37
- $41.47 |Â11% OFFÂ Phone Price : $46.47
- $95.55 |Â9% OFFÂ Phone Price : $105.55
- $122.06 |Â8% OFFÂ Phone Price : $132.06
- $407.94 |Â$10.00 OFFÂ Phone Price : $417.94
- $59.23 |Â8% OFFÂ Phone Price : $64.23
- $94.69 |Â5% OFFÂ Phone Price : $99.69
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #LFXS28566D/00 LG bottom-mount refrigerator | LFXS28566D/00 | All parts |
Model #LFX28968ST/05 LG bottom-mount refrigerator | LFX28968ST/05 | |
Model #LFC28768ST/03 LG bottom-mount refrigerator | LFC28768ST/03 | All parts |
Model #79572493610 Kenmore refrigerator | 79572493610 | Door parts |
Model #79572595711 Kenmore bottom-mount refrigerator | 79572595711 | All parts |
Model #79573053411 Kenmore bottom-mount refrigerator | 79573053411 | All parts |
Model #LRFDS2503S/00 LG bottom-mount refrigerator | LRFDS2503S/00 | All parts |
Model #LFXC22526S/01 LG bottom-mount refrigerator | LFXC22526S/01 | All parts |
Model #79572595712 Kenmore bottom-mount refrigerator | 79572595712 | All parts |
Model #LFC28768ST/00 LG bottom-mount refrigerator | LFC28768ST/00 | Door parts |
Reviews
Very easy to install.
I watched a video online and had this installed in less than 5 minutes. Be careful not to pull the old one off to hard- the wires on the old one broke easy. Works like a gem now.
Angela47, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Quick to install. A precise fit. Restored the fridge doors to original function.
Lafo, Maui
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Simple 10 minute job!
After living with the flipper not working correctly for quite some time and always having to make sure it was in the correct position to shut the fridge door I finally broke down and bought the part. We had replaced the spring at some point but then the plastic on the flipper had broken. Anyway, I'm kicking myself for not doing this sooner. It was a matter of unscrewing 2 screws and then lifting straight up on the flipper arm and unplugging it from the door. Simple reinstall of new flipper. !0 minutes total. Hardest part was unplugging the connector as it was quite tight!
Nanita, New Hampshire
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Fridge 'Flapper'
Exactly as ordered. It took less than 10 minutes to install. The Fridge now runs less 'keeps both sides sealed.
Pablo Z, Albuquerque, New Mexico
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
mullion/door flipper installation on LG refridge
The actual part that had broke was the "spring" on the Mullion which is available separately but I didn't find this out until after ordering this part, the left door flipper assembly. part number for the mullion spring is AP5331239 and the cost is four bucks. However, to install the mullion, unplug fridge, remove the 2 Phillips screws on the center hinge and then lift the mullion flipper up and remove. unplug male/female electrical connector. Reverse this order to install new part/flipper.
LeRoy, Melbourne, FL.
11 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy
it was easy only 5 minutes. Be sure you plac ethe spring in the top first
LG F D, Cincinnati, Ohio
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Replaced and installed the flipper assembly in fridge
PHYLLIS, Hudson, Florida
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
New stainless skin
Easy to install Less than five minutes only six screws
Uncle B, Arizona
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes