WILL THIS PART FIT MY MODEL?

kenmore-316489402-Range Oven Burner Igniter
Hover to Zoom

Range Oven Burner Igniter 316489402

★★★★★★★★★★
5
5
4
5
3
1
2
1
1
0

Part #316489402

This item is currently unavailable for purchase. We are sorry for any inconvenience.

If you choose to purchase a new product, please visit www.sears.com

This part fits
Kenmore, Tappan, Frigidaire, Crosley, White-Westinghouse

Part Information

This oven burner igniter (part number 316489402) is for ranges.

Oven burner igniter 316489402 ignites the gas to light the oven burner.

Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Reviews

1-8 of 12 reviews
davjef
south dakotaReviews 1Votes 0
★★★★★★★★★★
• 3 years ago
davjef• 3 years ago
easy to install

it took less then 15min. it was very simple to install.

Mjared66
Eureka ,caReviews 1Votes 1
★★★★★★★★★★
• 3 years ago
Mjared66• 3 years ago
Essy to install

10 min to install super simple, 5 screws total. Easy to connect wires!

Del Mr fix it...
Reviews 1Votes 1
★★★★★★★★★★
• 3 years ago
Del Mr fix it...• 3 years ago
Very easy

Took 20 minutes or less, very easy, screws out unplug the unit, plug it back in replace the screws and done...

Cealonzo
Houston, TexasReviews 1Votes 1
★★★★★★★★★★
• 3 years ago
Cealonzo• 3 years ago
Easy to Install

Replacing the igniter took 20 min with the bulk of the time spent on removing the oven door and cover plates in the oven. After that, I loosened the two bolts holding the igniter and separated the two clipped wire connectors. I then attached the wire connectors of the new igniter, bolted it back in position, and reinstalled the cover plates and oven door. My oven began baking soon after.

Kevinwdillon50
GeorgiaReviews 1Votes 0
★★★★★★★★★★
• 3 years ago
Kevinwdillon50• 3 years ago
Range Oven Igniter installation

Easy to install, found the directions on there site

Carlos Q.
Los Angeles californiaReviews 1Votes 0
★★★★★★★★★★
• 3 years ago
Carlos Q.• 3 years ago
Easy, no problem

Was easy, take me about, from start point until finish one hour.

Atez
Cincinnati, OhioReviews 1Votes 1
★★★★★★★★★★
• 3 years ago
Atez• 3 years ago
Easy to install

It was easy to install once I got the right bit for my screw driver. Needed a square head. Took about 25 minutes only because I'm new at this.

hands on
left coastReviews 1Votes 2
★★★★★★★★★★
• 3 years ago
hands on• 3 years ago
arrived as promised, was the correct part and work

The igniter on my gas oven went out after 2 years of use, I entered my make and serial number into the parts catalog and identified the correct replacement part. The cost of the replacement part is expensive. Part arrived as promised, installed without difficulty and worked. lady of the house is pleased to have her oven back in service.

1-8 of 12 reviews