Fisher & Paykel Washer Drain Pump Motor 479595
Part #479595
Part Information
This drain pump motor (part number 479595) is for washers.
Drain pump motor 479595 removes water from the washer during the drain portion of the cycle.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $310.61 |$10.00 OFF Phone Price : $320.61
Reviews
New washer drain pump motor
Pump came well packaged to protect it from damage. Just installed it yesterday, started using it today. After a few loads, seems to be working good. Sounds different from the original pump motor, but as long as it works, and doesn't leak, I'm a happy camper. I installed the fuse in the console; was fairly easy to do. Pump is very easy; 2 wires disconnected, twist off the old motor, twist on the new, reconnect wires.
bsman36, Apollo, Pa
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
OEM part
The new pump came with the additional fuse needed so the main fuse on the control board doesn't blow it the pump fails again. This was an OEM part, Sears was the only place I could find it under 200$ dollars. It was delivered ahead of the scheduled ship date I was given when I ordered it
Smill, Pittsburgh, pa
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
very easy to install
easy fix anyone can do. replacing this pump requires laying the washer on its back so get a helper if you can. always disconnect power and water lines first.
Will2075, Winchester Virginia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
It was very easy to install. But it came broken!
Unplug the unit then unplug the wires to the pump. Push the lock tab and turn the motor. Twist the new pump into place. Plug the wires back in to the pump and unit. Your done!
1990Snowman, Ohio
2 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to Install
Overall installation took just under 20 minutes. Installation of the pump itself took less than 2 minutes. The in-line fuse installation took about 15 minutes.
majotay, Pennsylvania
3 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Arrived quickly - best price!
Pump on fisher and paykel making noise, needed replaced
Lkozak, Missouri
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Took 15 minutes , mainly for splicing in the new fuse.
Purchaser, Connecticut
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Perfect fit and easy install
About the only part that is a little tricky is installing the in line fuse.
Notapro, NC
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes