CONFIRM THE PART FITS

Home  >  Washer Timer

Washer Timer 131437500

★★★★★★★★★★
5
2
4
1
3
1
2
0
1
0

Part #131437500

Online Only Price
$239.65 | 
$10.00 OFF 
Phone Price: $249.65
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

Special details: If the timer doesn't advance during the wash cycle, unplug the washer and check for continuity through the timer motor using a multimeter. Replace timer 131437500 if your meter measures infinite resistance.

This timer (part number 131437500) is for washers.

Timer 131437500 controls the electrical components and the duration of the washer's cycles.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Reviews

Jobdoneright1
MiamiReviews 1Votes 1
★★★★★★★★★★
• 5 years ago
Jobdoneright1• 5 years ago
Easy to install

It was easy to install and it only took 30 minutes. Make sure you have a good Phillips screwdriver.

pdenese
KCMOReviews 1Votes 1
★★★★★★★★★★
• 5 years ago
pdenese• 5 years ago
proper part

The part arrived in a timely manner; it was the correct part and it worked! Thank you so much.

Sam101
Spokane WAReviews 1Votes 1
★★★★★★★★★★
• 5 years ago
Sam101• 5 years ago
Fairly easy to install

Washer was dead and non-responsive on a stackable washer/dryer. Did all the regular checks. ie check for electricity, checked the lid switch by shorting the connector, and visual inspection. Pulled the control panel and could not find anything visibly wrong. So I got the model number and ordered a new Washer Timer. It mounts to the control panel with 2 10-32 screws next to the knob stem. Really easy to install except for the fact that the mounting screw holes were not tapped on the timer. I happened to have taps and tapped the holes. This would not be easy for the average person unless they know how to tap holes and have the proper tools. The good news is that it fixed the washer. Everything came back to life and the washer is working great again.

scott1628
IllinoisReviews 1Votes 1
★★★★★★★★★★
• 5 years ago
scott1628• 5 years ago
Timer Installation

Part replacement is fairly simple. There are some sharp edges on some of the panels. The overtemp sensor can come unplugged when taking the mounting panel out.