Refrigerator Water Filter 9030P

Part #9030P

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Part Information

Buy a multi-pack and SAVE $9.99 per filter.

Ensure clean, great-tasting water and ice with this manufacturer-approved filter.

One filter provides as much clean water as 2133 12-ounce bottles.

Reduces lime scale buildup, dirt and particles larger than 0.5 microns. Also removes the following:

  • Chlorine taste and odor
  • Particulates (Class I)
  • Lead
  • Mercury
  • Benzene
  • p-dichlorobenzene
  • Toxaphene
  • 2, 4-D
  • Asbestos
  • Cysts and Spores
  • Turbidity
  • Atrazine
  • Lindane
  • Alachlor
  • Endrin
  • 0-Dichlorobenzene

Leaves beneficial fluoride in the water. Certified to NSF/ANSI Standards 42 and 53.

To remove your old filter and install the new one, follow these steps:

  1. Press the button located next to the the filter to release it.
  2. Pull the filter straight out (no need to shut off the water--it will shut off automatically).
  3. Remove the cap from the end of the old filter (you'll need it later).
  4. Discard the old filter.
  5. Twist the cap onto the end of the new filter.
  6. Push the new filter straight in until it clicks into place.

If your refrigerator has a change-filter light, reset it as follows:

  1. If your refrigerator has a filter button, press and hold it for 10 seconds.
  2. If no filter button is provided, press the light switch trigger (the one that the refrigerator door presses when you close the door) 5 times within 10 seconds.