CONFIRM THE PART FITS

Home  >  Housing Assembly

Housing Assembly 318329600

★★★★★★★★★★
5
0
4
2
3
0
2
0
1
0

Part #318329600

Replaced by #318329601
?
Manufacturer substitution
This part replaces 318329600. Substitute parts can look different from the original.
Online Only Price
$1417.79 | 
$10.00 OFF 
Phone Price: $1427.79
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This induction module assembly (part number 318329601) is for ranges.

Induction module assembly 318329601 controls the induction element heating system. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Shut off the house circuit breaker or unplug the range before installing this part.

Reviews

Rudedawg
Henderson, NVReviews 1Votes 0
★★★★★★★★★★
• 2 years ago
Rudedawg• 2 years ago
Range Induction Module Assembly

Kenmore Elite Range - our induction cooktop shorted out and popped the circuit breaker after 12 years of faithful use. I had a very difficult time finding any useful diagnostic information or tear down and assembly instructions. I finally found the error code descriptions, it had a code 21 and when I looked that up I determined that it was not the problem. I took the oven apart and discovered that there were several burned components in the modular assembly. They had them priced as individual components or you could buy the entire assembly for actually less. I ordered the entire assembly which was in stock, once I placed the order I received a notification it was backordered? Then the next day I received a tracking number stating it would arrive in 4 days, (I paid for expedited shipping). The package arrived open, fortunately, there was no damage. For the cost and intricacy of the item it should packaged a little better. Anyways, I installed it and the range cooktop is working as good as new. I will say out of all the induction cooktops I have looked at over the years this is by far a very well thought out, user friendly design and I am very happy the parts were still available for it! I would not recommend doing this job unless you have some skill with mechanical and electrical assembly and diagnostics. Take photos as you disassemble!

Response from Sears PartsDirect:
MSO Offline • 2 years ago

We are sorry to hear that you did not have a positive experience with Sears Parts Direct. If you would like us to look into your situation further for you, please visit www.SearsPartsDirect.com and click the chat option on the bottom right corner to speak with a Parts Direct chat representative regarding the delivery charges.

Eazyrip
NJReviews 1Votes 2
★★★★★★★★★★
• 5 years ago
Eazyrip• 5 years ago
Easy to install...but pay attention

The assembly is a one for one swap. There are minor differences on the board where the controls board plugs into it, so you will eant to note which of the 2 identical female connectors is your mark. When disconnecting and reconnecting the power leads, be sure to note the copper jumpers beneath the existing wires/screws and place them on the new board at the same locations...obviously. in a low light situation, these can be missed on the first try...as I did. No instructions accompany the board and I didn't find an example on the Sears website, so just take pictures at the various stages of disassemby to reference later. There are A LOT of screws holding the outer casing and the inner assembly together, so the majority of time spent is just getting the unit out of the countertop and getting into it and then reversing the process. Be sure to pay attention to the wire lead to the control board, when you go to remove the cover/cooking surface glass. Lift from the sides but tilt it toward you and keep the front with the controls as close together as possible until you can disconnect the lead. Apart from that, it's a straight forward swap.