Click to Call Click to Chat

Washer Equator

Equator Washer Parts

Refine Your Search Results

Clear all

Select Part Type


Refine Part Type


Your Equator washer is normally a big help in keeping your household looking great in clean clothing. If you find the water isn't draining out of the machine, it's possible the machine itself isn't at fault. Use these troubleshooting tips and check in with Sears PartsDirect to determine how to get the machine to drain and start working properly again.

Check for Drainage Problems

Before you start checking for malfunctioning washer parts when your washing machine refuses to drain, first check the outflow hose from the machine. If it's twisted or kinked, straightening it out may solve the problem. Clogs or kinks in any other drain hoses or pipes lower than the washing machine tub may also be the cause of the drain. Removing clogs might get your water flowing normally again.

Check the Washer Drain Pump

If you hear a humming noise when the washer tub is filled with water, the drainage problem may be the result of a broken drain pump. It's the drain pump's job to remove water from the tub, but it can get clogged by debris or fail for a number of other reasons, including broken belts or impeller blades and seized bearings. Call Sears PartsDirect for washer repair help if you're trying to decide whether to repair or replace the washer drain pump.

Replace the Water-Level Pressure Switch

The water-level pressure switch is responsible for detecting the water level in your washer's tub. If it's defective, the tub may not fill appropriately, drain correctly or could even overflow. If you have a problem with the water-level pressure switch, you need to replace it.

Sears PartsDirect carries all sorts of parts for Equator washers. To make sure you're choosing the right part, choose your model from the list above, click the chat button or call 1-800-252-1698.