Model #XL-1500 Brother computer/printer

  • Frame Mechanism
    3 Results
  • Carrier Mechanism
    3 Results
  • Frame Attachments
    3 Results
  • Drive Mechanism
    3 Results
  • Paper Feed Mechanism
    3 Results
  • Tractor Mechanism
    3 Results
  • Switch Panel Pcb
    3 Results
  • Electrical Components
    3 Results
  • Logic Control Pcb, Mask Rom (cpd)
    3 Results
  • Power Supply Pcb, 127v
    3 Results
  • Print Head
    3 Results
  • Labels
    3 Results
  • Covers
    3 Results
  • Accessories
    3 Results
  • Optional Set
    3 Results

Question and Answers

Q:

where are the fuses in a GE Spacemaker XL?

A:

There are typically several internal fuses in the microwave but these are components that should only be accessed by a service technician.

The nature of your question indicates that the microwave may not be powering up. If this is the case, here are some tips that may help:

  • Make sure that the microwave is properly plugged into the outlet (usually in the cabinet above the microwave).

  • Check the house circuit breaker for the outlet that the microwave plugs into to make sure that it is not tripped.

  • Plug a small lamp or appliance into the outlet for the microwave to make sure that the outlet is working.

If these tips don't help, then you will likely need to have the microwave serviced. Microwaves are inherently dangerous to service due to high voltage components that can retain a lethal electrical charge even when the unit is completely unplugged. The microwave must also be checked for microwave leakage following any internal component repair. These are the reasons that a technician should complete any internal component repair (including internal fuses) on a microwave. Here is a link for the Sears Service website in case you need it: Sears Home Services .

NOTE: It may be more economical to replace the microwave instead of repairing it.

Read More
Lyle W -
Sears Technician
July 29, 2010
Q:

PTO on Craftsman LT 1500

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. The deck on your tractor is engaged with a cable. With the engine turned off have someone engage and disengage the mower while you watch the cable and the idler arm. The cable pulls on the spring that pulls the idler to tighten the belt. If the cable stretches the spring but does not move the idler, I suspect the pivot point on the idler is rusted. Usually spraying the area down with WD-40 and work it back and forth. I hope this is helpful.

Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 17, 2011
Q:

DP gympac 1500

A:

Thank you for your request for a instruction manual for the old DP gympac 1500. I have looked a number of places but could not find the manual for this gym.

I found a lot of references to the manual but could not find the actual manual.

I would suggest spending sometime on the some search engine web sites and you may be able to find one.

Sears sold a number of models of the DP gym Pac but I do not see a reference to this model.

I am sorry that I could not help you.

Sam A.

Read More
Sam A -
Sears Technician
May 04, 2012