Model #WFW95HEXW1 Whirlpool residential washers

  • Top And Cabinet Parts
    3 Results
  • Door Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Pump Parts
    3 Results
  • Optional Parts (not Included)
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

model number wfw95hexw1 whirlpool duet steam

A:

Thank you for your question and I understand your concern.

In order to access the drain pump filter; the front panel must the taken off.

Once the top, console panel, bellow clamp and the latch has been unscrewed, the screws securing the front panel can be removed. I added an image below showing the screws that must be removed in order to take the front panel off. The top panel has screws located at the back to remove in order to take the top off. Once the top is off you should see the screws securing the control panel to the front panel. Remove the screws securing the door lock assembly and remove the clamp securing the bellows to the front panel. Remove the screws circled in the image below and remove the front panel. NOTE: Disconnect the power cord from the power source before removing the top panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
April 10, 2012