Model #VR-505 Kenwood receivers

  • Cabinet Parts
    3 Results

Question and Answers

Q:

I have a new pro form treadmill, why does it hesitate when i walk on it?

A:

Thank you for your question as to why the treadmill hesitates while walking on it.

It is normal for the treadmill to slow down a little when you start on the walking belt. If the belt is slipping then you may have to adjust the tension on the walking belt on the back roller.

As you walk on the walking belt the sound of the motor will change pitch according to your walking gate.

You may also want to check the troubleshooting guide in your manual for the limits listed for this model.

If that does not help and since it is a new model you may want to call for service to check out the operation.

If you have more questions about the operation of the treadmill please reply to this thread.

Sam A.

Read More
Sam A -
Sears Technician
October 15, 2012
Q:

Repair of Craftsman scroll saw switch

A:

Thank you for your question.

I am sorry you are having a problem with the saw. By looking at the parts break down the retainer only holds the spacer in place. I do not see where removing it will cause any problems. After you make the repairs be sure to reinstall the spacer and retainer.

If the saw is considered shop, it is a product that is small enough for the customer to bring to the store for the repair. If you do not feel comfortable repairing the saw yourself I recommend calling your local Sears store to find out where to bring it. I am sorry they had said a service tech would need to come out.

Please let me know if you need further assistance on the saw I will be happy to assist you.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 18, 2011