Model #UWW-50P-LP Suburban furnace- wall

  • Cabinet And Body Assembly
    3 Results
  • Burner And Control Assemblies
    3 Results

Question and Answers

Q:

my slap stapler is jammed and i cannot figure out how to open the head of stapler to unclog it? Model HT50P

A:

Thank you for your question on the hammer stapler.

I am sorry that the tool has gotten clogged with staples.

If you remove the nut and bolt at the very back by the fill plunger you can remove the whole track and get the clogged cleaned out.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
September 21, 2011
Q:

LP gas

A:

Thank you for your question and I understand your concern.

Yes, your gas range can be converted to operate on LP gas. You will need to have a LP conversion kit installed. The part number of the kit is #316243703. The LP conversion kit should be installed by a qualified technician or your gas supplier.

I also added the instructions in the images below.

You can order the kit from Sears PartsDirect .

Read More
Joey S -
Sears Technician
January 12, 2011
Q:

lp conversion

A:

NOTE: This conversion should be completed by a qualified installer.

The instructions for converting this cook top to LP gas are shown in the image below. If you do not already have the LP orifices for the cook top burners, then you can order them from the Sears PartsDirect website.

This information should help the installer properly convert this cook top. If you need more assistance, reply with additional details.

Contact your local gas supply for a qualified installer. You may also be able to find a pre-screened service provider that can complete this conversion through the ServiceLive.com website.

Read More
Lyle W -
Sears Technician
October 12, 2011