Model #UH-2120-1 Empire air handler-auxiliary heater kit

  • Functional Replacement Parts
    3 Results

Question and Answers

Q:

I purchased a Kenmore top-loader washer Model 2120 last June and have always felt it took too long to do a cycle - 1 hr. 20 min - but can't find anywhere in the

A:

Long cycle times for that washer are not unusual. The manufacturer does not provide exact cycle times for that model. The cycle time will vary based on many different factors. Load size can affect the cycle time. If the load becomes unbalanced during the cycle, the washer may take extra time to balance that load. This information may help you understand the cycle times on that washer. If you need more assistance, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
April 20, 2012
Q:

My power went out and I was using my Kenmore top loading washing machine. When power came back on I cannot get it open the lid locked light is blinking.

A:

Check for other blinking lights on the control along with that lock light blinking. The status lights beside the control will blink lights in a pattern if the control detects a problem with a component in the washer.

Try unplugging the washer for 5 minutes and then plugging it back in may reset the control. After plugging the washer back in, try to cancel the cycle.

If the washer still won't work and it is under warranty, I recommend that you call Sears at 1-800-469-4663 (1-800-4MY-HOME) to talk to a technical specialist and schedule service if necessary.

If the washer is not still under warranty, reply with additional details (any other lights lit or blinking on the control). We will assist you further once we receive more information.

Read More
Lyle W -
Sears Technician
May 31, 2011
Q:

Kenmore 2120 washer. There seems to be no noise or no motor runing only the agitator turning, should this be?

A:

Hi Richard,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your washer.

This particular washer sounds vastly different from what we are used to. If the agitator is moving the motor is moving, there are no two ways around that. Also this washer is very good about letting you know if it detects a problem with itself. It will stop and flash error codes.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 25, 2011
A:

Richard: As Landell said, if the agitator is moving; the motor is running. Based on the model number; your new designed washer will sound quiet compared to your last model. Your washer is operating as designed.

Read More
Joey S -
Sears Technician
July 29, 2011
See more answers