Model #UH-1300 Empire air handler-auxiliary heater kit

  • Functional Replacement Parts
    3 Results

Question and Answers

Q:

My Lifestyler 1300, model TL 880 831-29621 Speed will not change. It runs at max speed only. Why?

A:

The speed adjustment for your treadmill is a variable speed pulley on the motor shaft. You adjust the speed with a knob that causes the pulley to move and become wider to slow the treadmill down.

Remove the hood and spray the pulley and cable with some WD40. Tap lightly on the pulley sheave with a hammer until it will move. The pulley is probably frozen to the shaft from being stored. Very few parts are available for the treadmill so don't break anything.

Read More
Jimmy K -
Sears Technician
May 18, 2009
Q:

What are the other RPM spin speeds on my Kenmore Elite Front-Loading Washer, model 796.41542?

A:

Hi Caroline,

Thank you for submitting a question to Manage My Life.

Here is the information you requested on spin speeds.

Washer RPMS

Low = 400 RPM

Medium = 600 RPM

High = 1000 RPM

Extra High = 1150 to 1300 RPM

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 13, 2011
Q:

Why won't my Kenmore Elite dual fuel oven come up to temperature?

A:

Without a full model number for your 790 duel fuel range, I am not able to see the specific technical information. Since the resistance of the bake element is 18 ohms, this suggests that the bake element is okay. On most duel fuel ranges the bake and broil elements alternate but they are not normally both energized at the same time. Check to see if the broil function works properly on the oven. Unplug the oven and check the wire harness connections between the electronic control board and the bake element. I recommend that you resubmit your question with additional details and the full model number of your Kenmore Elite duel fuel range. We will be glad to help you further once we receive additional information.

Read More
Lyle W -
Sears Technician
December 08, 2009