Model #SVE47100B Jenn-air slide-in range, electric

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Body
    3 Results
  • Oven
    3 Results
  • Door
    3 Results
  • Access Panel
    3 Results
  • Blower Assembly (plenum)
    3 Results
  • Wiring Information (sve47100b/w)
    3 Results
  • Wiring Information (sve47100bc/wc)
    3 Results
  • Wiring Information (sve47100b/w-ser 15)
    3 Results
  • Wiring Information(sve47100bc/wc Ser 14)
    3 Results

Question and Answers

Q:

JennAire Electric Range #sve47100b: We replace the heating element on this electric range, and it contiunes to not go over 100 degrees, plus it makes clicking

A:

Thank you for your question.

I can understand your concern when the parts you have already replaced have not corrected the problem of no bake.

If the top of your range is working okay we know we have 240 volts to the range.

From your description of the clicking noise it sounds like the relay on the relay board.

Since you have already done some voltage checks on the range I would like you to check the voltage on the relay board.

You should have a constant 120 volts going to the BR and the BA terminals on the relay board, thus the voltage you measured on the elements.

Please check for 120 volts from L2 to ground and BA to ground. If you have 120 volts in both those places it sounds like the relay is not staying closed.

The L2 terminal on the electronic control/relay board also needs to have 120 volts and when you choose the bake function on the control the relay should close between BA and L2 side of the line and you would have 240 volts to the element. If the relay is not staying closed (the clicking sound) it would indicate the control is not keeping the relay closed.

Since you have already checked the oven sensor I would have to conclude that the electronic control has failed.

I have given you a wiring diagram for the range and I would like you to refer to the electronic control at contacts BA, BR and L2. If you check across BA or BR to L2 you should get 240 volts.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 22, 2011
Q:

remove top from jenn-air

A:

I provided the procedure for removing the main top of this range in the image below. Be sure that you shut off the house circuit breaker for the range before accessing internal components.

If you need more help, reply with additional details and we will try to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 27, 2011

Top Parts