Model #SVD8310S-C Jenn-air slide-in range, electric/gas

  • Control Panel
    3 Results
  • Door
    3 Results
  • Access Panel
    3 Results
  • Top Assembly
    3 Results
  • Gas Controls
    3 Results
  • Body
    3 Results
  • Internal Controls
    3 Results
  • Oven
    3 Results
  • Blower Motor (convection)
    3 Results
  • Wiring Information (svd8310s)
    3 Results
  • Blower Motor-plenum
    3 Results
  • Blower Motor (cooling)
    3 Results
  • Wiring Information (svd8310s-c)
    3 Results

Question and Answers

Q:

My package :c

A:

Thank you for your question.

I am sorry you are having a problem with your order. I recommend calling our online customer service number. The number is 1-800-349-4358. They handle all online purchases and should be able to resolve this problem. I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 02, 2012
Q:

Hello I have a Jenn-Air range model SVD8310S. The dual fans switch has failed. The replacement switch is for the fan only. I need help wiring the new switch.

A:

Thank you for your question and I understand your concern.

Based on the wiring schematic, I do not believe a two terminal fan switch will subsitute for a 4 terminal fan switch in this model range. The 4 terminal fan switch is no longer available and if there was one available that would work, the part number would substitute over and I do not show a substitute fan switch.

I added the wiring diagram below and you will see.

You would not want to connect any white (Nuetral wires) to any line voltages L1 or L2 power source.

I suggest contacting Jenn-Air at  1-800-JENN-AIR (536-6247) and see if they have a substite fan switch for your model.

Read More
Joey S -
Sears Technician
March 23, 2013
Q:

Frigidaire FAC066L7A2 A/C

A:

Without being there to personally hear the noise I will not be able to say with any certainty of what's making the noise. The noise could be emitting from a bad fan motor (key#8), unbalance or bent condenser fan (key#1) or evaporator fan blade (key#11) or you could be hearing the condenser fan blade slinging water through the condenser coil. The noise could also be the compressor (key#1) and not the fan. If it does not make the noise when fan only is pressed then the noise is likely coming from the compressor or a vibration noise. See image below for "Normal" sounds.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 16, 2010