Model #SUR-G11S Sony audio/video accessories and antenna

  • Stand Assy
    3 Results

Question and Answers


Fried gd circuit board? Litng struke during opning of my 1/2 hp crftmn it froze 1/2 open. Hw can i b sur the bd is the prblem b 4 buying new one?


Thank you for your question on the garage door opener.

It definitely sounds like the board was fried with the lighting strike in the area.

If you are able to somehow release the door from the opener then try to operate the opener and it flashes 5 times would indicate that the RPM sensor was damaged.

You could change the RPM sensor board before you change the main logic board.

The RPM sensor board part number 41C4398A is only about $18.00 but the logic board 41A4315-6G is about $90.00 and you might want to think about replacing the whole opener for about $130.00. For $40.00 more you could have a new opener.

My concern is how much damage was done to the opener components.

Also you may be able to claim it on your home owner's insurance depending on your deductible.

Garage door openers .

Please let me know what you have found, and we can continue our troubleshooting based on that.

Sam A.

Read More
Sam A -
Sears Technician
August 11, 2011

Kenmore gas stove top burner are not working PF Loc is the codes it gives.


Some gas ranges will automatically lock out the cook top during a power failure. The cook top control on that range is probably locked. The image below shows the procedure for unlocking the cook top on the most common Kenmore range that has that cook top lock out feature. That information may help you resolve this problem.

If you need more help, reply with additional details. Try to provide us with a model number if possible.

Read More
Lyle W -
Sears Technician
August 15, 2011