Model #SUPER 2 Homelite chainsaw, gas

  • Figure 1
    3 Results
  • Figure 2
    3 Results
  • Figure 3
    3 Results
  • Carburetor
    3 Results

Question and Answers

Q:

I am missing a part for my very old Homelite Super 2 Chainsaw model 104554.

A:

Thank you for your question and I understand your concern.

I added a link toPartsdirect.com where you can view the parts of the Homelite Super 2 chainsaw. Looking at the image of the gas tank on the web for your model, the upper hole near the filler neck had the primer hose inserted through the hole. The hole below the upper hole is where the fuel line is inserted through which connects to the bottom of the carburetor. You said it doesn't have a primer but the image shows that it did. Maybe the primer was removed?

If you're certain this model did not come with a primer bulb, I found a parts image of model  SUPER 2-UT10653 which shows a duck bill check valve installed slightly below the filler neck of the gas tank. The duck bill check valve is part #69451 which is still available at Searspartsdirect.com

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
July 11, 2013
Q:

Why does my Kenmore washing machine model number 2125 take 2 hours to wash a super load?

A:

Hi Monica,

Thank you for submitting a question to Manage My Life.

This particular washer is a load sensing washer. This mean the washer will fill with water and then agitate to "sense" the load size. It will then go through more sensing routines until the computer determines the correct amount of water for that particular load. It is not uncommon that I hear of loads taking well over an hour to complete.

The first thing I recommend is checking for error codes. This washer has a test routine you can run that will help in the diagnosis of any problems the control detects. If the control detects a problem it will identify it with an error code. I am including this information in a set of images below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please perform the diagnostic tests detailed here and if any error codes are displayed, report back with your findings. Be sure to record any failures and when they occur along with any error codes that are displayed.

Landell

Read More
Landell -
Sears Technician
November 21, 2011
Q:

My electric dryer is turning on (the power lights and numbers are coming on) but it will not start.

A:

I see that you asked a subsequent question and provided the model number for your dryer ( My Kenmore Elite Turbo Super Capacity Electric Dryer Model # 110.67042600 will not work. Power will turn on, but it will not start. )  I provided some repair tips in that answer. 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
April 12, 2013