Model #SR23 Schwinn cycle

  • Cabinet Parts
    3 Results

Question and Answers

Q:

Schwinn SR23 Recumbent bike resistance not working SR23 Schwinn Recumbent

A:

That motor is probably a 9 volt motor. You should measure between 6 and 12 volts DC.

Read More
Lyle W -
Sears Technician
December 19, 2014
Q:

How do you tighten the crank arms on a Schwinn SR23 recumbent exercise bike?

A:

The bolt that holds the crank arms to the axle is probably a torx head. You should be able to tighten the bolts from the outside.

You can buy a set of torx bits with a driver for around $10.00.

Read More
Jimmy K -
Sears Technician
March 25, 2010
Q:

My Schwinn SR23 recumbent exercise bike has E - 2 display on the computer and will not clear or I do not know how to clear or what this means. Can you help?

A:

The error code E2 on your bike indicates a problem with the wiring harness that goes through the frame from the console to the speed sensor and the resistance motor.

The problem could be in a connector or where a wire has had the insulation worn off and is touching ground.

Someone will need to test the wiring harness with an ohm meter to clear the problem.

Read More
Jimmy K -
Sears Technician
February 05, 2010