Model #SEARS-74321 Tractor Accessories tractor attachments

  • Replacement Parts
    3 Results

Question and Answers

Q:

Sears 155.705113 Sears 155.705113

A:

Thank you for your question and I understand your concern.

Based on the age of the unit and lack of any operational instructions available, I strongly suggest calling a service technician to inspect and provide operational and lighting instructions. We do not have a Owner's Manual or any operational  or lighting information.  It appears that you will need to open the oil control valve and the oil should flow to the bottom of the unit where you would ignite it with a long nosed lighter. I also appears there was an optional fan forcing air into it also. Other than that we do not have any information other than a parts list and image located at Searspartsdirect.

Read More
Joey S -
Sears Technician
May 16, 2014
Q:

Sears microwave

A:

Thank you for your question.

I have checked the model number you have submitted. I think the part you are looking for is called the inlet cover. I have added an image of the part below. If this is the correct part the part number is 8184604 and can be ordered form our parts website Sears Parts Direct . The cover might look different from the cover in the unit now. The manufacture has substituted the old cover to this one. Make sure to use instructions and the sealant provided and let it cure for 8 hours before you use the microwave.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 05, 2010
Q:

Sears Microwave

A:

Thank you for your question.

I see that Barbara H has given you a good link to a pervious answer on the F9 error code. It is strongly recommended to have the microwave serviced by a service technician. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 24, 2011