Model #SC150H-7-4 Climette/keeprite/zoneaire air conditioner -room

  • Parts List
    3 Results
  • Parts List
    3 Results

Question and Answers

Q:

I have a 7 1/4" compound miter Saw with laser. I cannot get the laser to work. Why?

A:

Some saws have batteries for the laser. If your model does have batteries replace them. If your saw has no batteries, the laser probably needs to be replaced.

Read More
Jimmy K -
Sears Technician
Q:

How do I change the brushes on my Craftsman 7 1/4'' circular saw?

A:

If there is no visible access to the brush holders located near the back of the motor the back cover (key#2) must be removed in order to access the brushes (key#7). Remove the brush holder (key#6) by removing the brush holder clamp screw and holder. _NOTE: Unplug the saw from the power source before servicing.

I recommend taking the saw to the nearest service center to have the brushes replaced.

Read More
Joey S -
Sears Technician
April 14, 2009
Q:

Power cord for a Craftsman 7 1/4 circular saw model 315109250

A:

Thank you for your question on the power cord for the saw.

I am sorry that the original power cord is not longer available.

You should be able to purchase a generic power tool cord.

You local Sears hardware department or you local Home Centers will have generic 16/2, 2 prong power cords for your saw.

If your saw has a 3 wire cord then I would suggest 16/3 if it has the ground plug on the cord.

I would remove the old cord strain relief and install it on the new cord.

Please let me know what you find out and we can continue if needed.

Sam A.

Read More
Sam A -
Sears Technician
September 20, 2011