Model #SC150E-7-2 Climette/keeprite/zoneaire package units(both units combined)

  • Model Notes
    3 Results
  • Functional Horizontal Coils/erh56xa3
    3 Results
  • Functional Replacement Parts/erh84xa4
    3 Results
  • Functional Replacement Parts/eh120x2
    3 Results
  • Functional Replacement Parts/ak144et
    3 Results
  • Functional Replacement Parts/ph150x2
    3 Results
  • Functional Replacement Parts/ak123at
    3 Results
  • Functional Replacement Parts/prh56xa3
    3 Results
  • Functional Replacement Parts/ph120x2
    3 Results

Question and Answers

Q:

manuel for sears and roebuck 7 1/2 in table saw

A:

Thank you for your question.

I am sorry you are having a problem with the saw. I searched for a copy of the manual but we do not have a copy of it. I was able to find a manual for a model I think is close to yours. Click here to load the manual.

If the elevation is not working correctly, I recommend spraying the elevation screw and the pivots with WD-40. After soaking the screw, work the elevation up and down. Once it is free, wipe all of the WD-40 off the saw, and lube the screw with powder graphite.

I hope this helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 28, 2012
Q:

Why haven't I rec'd answers from 6 and 7 days ago when should have been within 2 days as indicated.

A:

Without a model number, I can't tell you what F-2 means on your range. If you want a specific answer send another email and include the model number of the range.

On most Kenmore ranges F2 means the electronic oven sensor has failed. F2 can also be caused by a defective control board.

I apologize for the delay in answering your question. We got behind during the holiday season because of vacations and we are trying to catch up. We will have things caught up in another 7-10 days and get back on schedule.

Read More
Jimmy K -
Sears Technician
Q:

How do I connect a 7/8 inch drain hose to a 1/2" fitting?

A:

Without knowing the model number of your dishwasher I will only be able to provide general information. Generally speaking, the end of the original drain hose supplied with most dishwashers normally has an adapter at the end of the drain hose. It can be cut off as needed to fit the connection for your application to reduce it from 7/8 inch to 1/2 inch. See image below.

Universal dishwasher drain hose adapters are available at any major home improvement center or plumbing supply.

Read More
Joey S -
Sears Technician
July 06, 2009